96 lines
3.8 KiB
Plaintext
96 lines
3.8 KiB
Plaintext
OPALVIEW (digital logic viewer) Help File ESC will Exit
|
|
|
|
|
|
The Viewer Shows the Following States
|
|
|
|
3 Logic Levels -- 1,0 and Unknown (three lines)
|
|
|
|
Each Logic Level can have one of Three Strengths
|
|
|
|
Driving Strength - SOLID GREEN
|
|
Resistive Strength - DOTTED BLUE
|
|
Tri-State Strength - DOTTED RED
|
|
|
|
Buses are Shown in Red with the Hex Value Centered
|
|
between the Transitions.
|
|
|
|
|
|
|
|
<CR> <more>
|
|
|
|
Mouse functions:
|
|
----------------
|
|
Move Mouse Up : Move cursor up one position.
|
|
: If cursor is at top move traces down.
|
|
Move Mouse Down : Move cursor up down position.
|
|
: If cursor is at bottom move traces up.
|
|
Move Mouse Left : Move cursor left one position.
|
|
: If cursor is at side move traces right.
|
|
Move Mouse Right : Move cursor right one position.
|
|
: If cursor is at side move traces left.
|
|
|
|
Left Button : If highlighted and held, drag signal.
|
|
: If not highlighted, zoom in.
|
|
Middle Button : If highlighted, copy signal.
|
|
: If not highlighted, toggle reference marker.
|
|
Right Button : If highlighted, delete signal.
|
|
: If not highlighted, zoom out.
|
|
<CR> <more>
|
|
Keypad functions:
|
|
-----------------
|
|
Up arrow : Move cursor up one position.
|
|
: If cursor is at top, move traces down.
|
|
Down arrow : Move cursor down one position.
|
|
: If cursor is at bottom, move traces up.
|
|
Left arrow : Move cursor left one position.
|
|
: If cursor is at side, move traces right.
|
|
Right arrow : Move cursor right one position.
|
|
: If cursor is at side, move traces left.
|
|
^ Left arrow : Move cursor left half screen.
|
|
: If cursor is at side, move traces right.
|
|
^ Right arrow : Move cursor right half screen.
|
|
: If cursor is at side, move traces left.
|
|
Shift Left arrow : Move screen left one position.
|
|
Shift Right arrow : Move screen right one position.
|
|
Shift F10 : Print screen.
|
|
|
|
<CR> <more>
|
|
Home : Move cursor to left side of screen.
|
|
End : Move cursor to right side of screen.
|
|
^ Home : Move cursor to beginning of file.
|
|
^ End : Move cursor to end of file.
|
|
PgUp : Drag trace up one position, if highlighted.
|
|
PgUp : Move cursor up ten positions, if not highlighted.
|
|
: If at top, move traces down.
|
|
PgDn : Drag trace down one position, if highlighted.
|
|
PgDn : Move cursor down ten positions, if not highlighted.
|
|
: If at bottom, move traces up.
|
|
+ : Zoom in.
|
|
- : Zoom out.
|
|
* : Toggle reference marker.
|
|
r : Reset program to starting conditions.
|
|
? : Display this file.
|
|
INS : Copy trace, if highlighted.
|
|
DEL : Delete trace, if highlighted.
|
|
ESC or ^C : Exit program.
|
|
<CR> <more>
|
|
|
|
NOTES:
|
|
|
|
At the top left of the screen is the current cursor position.
|
|
The top right of the screen is for the delta readout,
|
|
i.e., the cursor position minus the reference marker position.
|
|
|
|
The reference marker is toggled on/off by the middle mouse button.
|
|
Both of these readouts change to red when zoomed out past one bit
|
|
of information per pixel.
|
|
|
|
NOTE: Information can be missed while zoomed out.
|
|
|
|
The help screen can be exited at any time by pressing the ESC key
|
|
instead of paging through the whole file.
|
|
|
|
Page Up and Page Down can move though the help file.
|
|
|
|
<CR> <end>
|