SyncHome/trunk/workspace/09_3D-Draws/Orange_Pi_Zero_Case

                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:1986658
Orange Pi Zero Case by xoan is licensed under the BSD License license.
http://creativecommons.org/licenses/BSD/

# Summary

Compact and simple Orange Pi Zero enclosure based on [Orange Pi Zero Case](http://www.thingiverse.com/thing:1918590) by [Farrukh Pitafi](http://www.thingiverse.com/farrukh/about) designed from scratch using [FreeCAD](http://www.freecadweb.org/).

Source files: https://github.com/xoan/3D-parts/tree/master/orange-pi-zero-case

# Print Settings

Printer: FoldaRap 1.1
Rafts: Doesn't Matter
Supports: No
Resolution: 250 µm
Infill: 25%

# Post-Printing

## Tools

* Ø3 mm. and Ø5 mm. drill bits
* 4 x DIN-7981 2.9 x 9.5 mm. (13 mm. long works too)

## Instructions

1. Drill the holes in `orangepi-zero-case-bottom.stl` with the Ø3 mm. drill bit and the antenna hole in `orangepi-zero-case-top.stl` with the Ø5 mm. drill bit.
2. Insert the antenna through the hole and assembly the two parts with the board inside taking care with the antenna wire.

# How I Designed This

![Alt text](https://cdn.thingiverse.com/assets/b7/b8/78/03/12/Captura_de_pantalla_2016-12-21_16-43-16.png)
FreeCAD 0.16