topicchi/SyncHome
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2dd347122e41ae02674bd9a834f7f9727d2873d7
SyncHome/trunk/Arduino/libraries/TFT_ILI9340/TFT_ILI9340.h
topicchi e2f276193e daily_automated
2023-03-17 11:59:21 +00:00

255 lines
9.9 KiB
C++
Raw Blame History

/*
ILI9340C - A fast SPI driver for TFT that use Ilitek ILI9340C.
Features:
- Very FAST!, expecially with Teensy 3.x where uses DMA SPI.
- It uses just 4 or 5 wires.
- Compatible at command level with Adafruit display series so it's easy to adapt existing code.
- It uses the standard Adafruit_GFX Library (you need to install).
Background:
Adafruit it's a great company, always very nice with developers and released a library for
all his products completely free downloadable. However I don't like some of their libraries
since are slow and not optimized for all popular MCU. I got a display from Ebay
http://www.ebay.com/itm/281304733556
and I'm not using the Adafruit one since was not available when I ordered but it looks
exact the same and works in the same way so I've tried the related library first that
was slow and not optimized, it works but can be much better.
Paul Stoffregen and Adafruit maded together a great work for the ST7735 that it's a popular
display and works fast with almost all popular MCU so I grab some of the routines and applied
to this one, optimized some of the code and result it was really nice.
Code Optimizations:
The purpose of this library it's SPEED. I have tried to use hardware optimized calls
where was possible and results are quite good for most applications, actually nly filled circles
are still a bit slow. Many SPI call has been optimized by reduce un-needed triggers to RS and CS
lines. Of course it can be improved so feel free to add suggestions.
-------------------------------------------------------------------------------
Copyright (c) 2014, .S.U.M.O.T.O.Y., coded by Max MC Costa.
ILI9340C Library is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
ILI9340C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This file needs the following Libraries:
Adafruit_GFX by Adafruit:
https://github.com/adafruit/Adafruit-GFX-Library
Remember to update GFX library often to have more features with this library!
From this version I'm using my version of Adafruit_GFX library:
https://github.com/sumotoy/Adafruit-GFX-Library
It has faster char rendering and some small little optimizations but you can
choose one of the two freely since are both fully compatible.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Special Thanks:
Thanks Adafruit for his Adafruit_GFX!
Thanks to Paul Stoffregen for his beautiful Teensy3 and DMA SPI.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Version:
0.5b1: First one and working.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BugList of the current version:
- Actually no scroll commands (only in release will be included).
*/
#ifndef _TFT_ILI9340H_
#define _TFT_ILI9340H_
#if ARDUINO >= 100
#include "Arduino.h"
#include "Print.h"
#else
#include "WProgram.h"
#endif
#if defined(__MK20DX128__) || defined(__MK20DX256__)
//Teensy3.x has 2 SPI interfaces, choose one
#define _SPIINTERFACE_A //mosi=11, sclk=13 (default)
//#define _SPIINTERFACE_B //mosi=7, sclk=14
#if defined (_SPIINTERFACE_A) && defined(_SPIINTERFACE_B)
#error you must choose only one SPI interface
#endif
#endif
#if defined(__SAM3X8E__)
#include <include/pio.h>
#define PROGMEM
#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
#define pgm_read_word(addr) (*(const unsigned short *)(addr))
typedef unsigned char prog_uchar;
#endif
#if defined(__MK20DX128__) || defined(__MK20DX256__)
//do not touch here
#define CTAR_24MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0) | SPI_CTAR_DBR)
#define CTAR_16MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0) | SPI_CTAR_DBR)
#define CTAR_12MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0))
#define CTAR_8MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0))
#define CTAR_6MHz (SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1))
#define CTAR_4MHz (SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1))
#endif
#ifdef __AVR__
#include <avr/pgmspace.h>
#endif
#define TFT_WIDTH 240//240
#define TFT_HEIGHT 320//320
#define TFT_MW TFT_WIDTH -1
#define TFT_MH TFT_HEIGHT -1
#define _CMD_NOP 0x00//No Operation
#define _CMD_SWRESET 0x01//Software Reset
#define _CMD_SLPIN 0x10//Enter Sleep Mode
#define _CMD_SLPOUT 0x11//*Sleep OUT
#define _CMD_PTLON 0x12//Partial Mode ON
#define _CMD_NORON 0x13//Normal Display Mode ON
#define _CMD_INVOFF 0x20//Display Inversion OFF
#define _CMD_INVON 0x21//Display Inversion ON
#define _CMD_GAMMASET 0x26//*Gamma Set
#define _CMD_DISPOFF 0x28//Display OFF
#define _CMD_DISPON 0x29//*Display ON
#define _CMD_CASET 0x2A//*Column Address Set
#define _CMD_PASET 0x2B//*Page Address Set
#define _CMD_RAMWR 0x2C//*Memory Write
#define _CMD_PTLAR 0x30//Partial Area
#define _CMD_VSCRLLD 0x33//Vertical Scrolling Definition
#define _CMD_TEFXOFF 0x34//Tearing Effect Line OFF
#define _CMD_TEFXON 0x35//Tearing Effect Line ON
#define _CMD_MADCTL 0x36//*Memory Access Control
#define _CMD_VSCLLSA 0x37//Vertical Scrolling Start Address
#define _CMD_IDLEOFF 0x38//Idle Mode OFF
#define _CMD_IDLEON 0x39//Idle Mode ON
#define _CMD_PIXFMT 0x3A//*Pixel Format Set
#define _CMD_WRMEMCON 0x3C//Write Memory Continue
#define _CMD_TEARSCN 0x44//Set Tear Scanline
#define _CMD_WDBRIGHT 0x51//Write Display Brightness
#define _CMD_WCTRLDIS 0x53//Write CTRL Display
#define _CMD_WCABRGCTRL 0x55//Write Content Adaptive Brightness Control
#define _CMD_WCABCMBRG 0x5E//Write CABC Minimum Brightness
#define _CMD_RGBINTSC 0xB0//RGB Interface Signal Control
#define _CMD_FRMCTR1 0xB1//*Frame Control (In Normal Mode)
#define _CMD_FRMCTR2 0xB2//Frame Control (In Idle Mode)
#define _CMD_FRMCTR3 0xB3//Frame Control (In Partial Mode)
#define _CMD_INVCTR 0xB4//Display Inversion Control
#define _CMD_BLKPC 0xB5//Blanking Porch Control
#define _CMD_DFUNCTR 0xB6//*Display Function Control
#define _CMD_ENTMSET 0xB7//Entry Mode Set
#define _CMD_BKLGCTRL1 0xB8//Backlight Control 1
#define _CMD_BKLGCTRL2 0xB9//Backlight Control 2
#define _CMD_BKLGCTRL3 0xBA//Backlight Control 3
#define _CMD_BKLGCTRL4 0xBB//Backlight Control 4
#define _CMD_BKLGCTRL5 0xBC//Backlight Control 5
#define _CMD_BKLGCTRL6 0xBD//Backlight Control 6
#define _CMD_BKLGCTRL7 0xBE//Backlight Control 7
#define _CMD_BKLGCTRL8 0xBF//Backlight Control 8
#define _CMD_PWCTR1 0xC0//*Power Control 1
#define _CMD_PWCTR2 0xC1//*Power Control 2
#define _CMD_PWCTR3 0xC2//Power Control 3 (normal)
#define _CMD_PWCTR4 0xC3//Power Control 4 (idle)
#define _CMD_PWCTR5 0xC4//Power Control 5 (partial)
#define _CMD_VMCTR1 0xC5//VCOM Control 1
#define _CMD_VMCTR2 0xC7//VCOM Control 2
#define _CMD_MVMEMWR 0xD0//NV Memory Write
#define _CMD_MVMEMPK 0xD0//NV Memory Protection Key
#define _CMD_POSGAMUT 0xE0//Positive Gamma Correction
#define _CMD_NEGGAMUT 0xE1//Negative Gamma Correction
#define _CMD_DGAMMCTRL1 0xE2//Digital Gamma Control 1
#define _CMD_DGAMMCTRL2 0xE3//Digital Gamma Control 2
#define _CMD_INTFCTRL 0xF6//Interface Control
#define BIT_MADCTL_MY 0x80//*
#define BIT_MADCTL_MX 0x40//*
#define BIT_MADCTL_MV 0x20//*
#define BIT_MADCTL_ML 0x10
#define BIT_MADCTL_RGB 0x00
#define BIT_MADCTL_BGR 0x08//*
#define BIT_MADCTL_MH 0x04
#define _CMD_RDID1 0xDA
#define _CMD_RDID2 0xDB
#define _CMD_RDID3 0xDC
#define _CMD_RDID4 0xDD
#define _CMD_GMCTRP1 0xE0
#define _CMD_GMCTRN1 0xE1
/*
#define ILI9340_PWCTR6 0xFC
*/
class TFT_ILI9340 : public Adafruit_GFX {
public:
TFT_ILI9340(uint8_t CS, uint8_t RS, uint8_t RST);
TFT_ILI9340(uint8_t CS, uint8_t RS);
void begin(void),
setAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1),
pushColor(uint16_t color),
fillScreen(uint16_t color=0x0000),
drawPixel(int16_t x, int16_t y, uint16_t color),
drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
fillRect(int16_t x, int16_t y, int16_t w, int16_t h,uint16_t color),
setRotation(uint8_t r),
invertDisplay(boolean i);
void clearScreen(int16_t color = 0x0000);
uint16_t Color565(uint8_t r, uint8_t g, uint8_t b);
//void setBrightness(byte val);
void writeData(uint8_t data);
void setBitrate(uint32_t n);//speed for the SPI interface
private:
bool _inited;
void commonInit();
void chipInit();
void writedata16(uint16_t d);
void writeCommand(uint8_t c);
void writeCommands(uint8_t *cmd, uint8_t length);
void setRegister(const uint8_t reg,uint8_t val);
bool boundaryCheck(int16_t x,int16_t y);
#if defined(__AVR__)
void spiwrite(uint8_t);
volatile uint8_t *dataport, *clkport, *csport, *rsport;
uint8_t _cs,_rs,_sid,_sclk,_rst;
uint8_t datapinmask, clkpinmask, cspinmask, rspinmask;
#endif
#if defined(__SAM3X8E__)
void spiwrite(uint8_t);
Pio *dataport, *clkport, *csport, *rsport;
uint8_t _cs,_rs,_sid,_sclk,_rst;
uint32_t datapinmask, clkpinmask, cspinmask, rspinmask;
#endif
#if defined(__MK20DX128__) || defined(__MK20DX256__)
uint8_t _cs,_rs,_rst;
uint8_t pcs_data, pcs_command;
uint32_t ctar;
volatile uint8_t *datapin, *clkpin, *cspin, *rspin;
#endif
};
#endif
Reference in New Issue View Git Blame Copy Permalink