(.../Documents/src/pcbgcode/pcb-gcode.ulp)
(Copyright 2005 - 2009 by John Johnson)
(See readme.txt for licensing terms.)
(This file generated from the board:)
(.../pcbgcode/docs/examples/enabtmr.brd)
(Current profile is .../pcbgcode/profiles/generic.pp  )
(This file generated 2/7/09 10:26 AM)
(Settings from pcb-machine.h)
(  Tool Size)
(0.0100 )
(Z Axis Settings)
(  High     Up        Down     Drill)
(0.5000 	0.1000 	-0.0070 	-0.0320 )
(spindle on time = 3.0000)
(milling depth = -0.0100)
(text depth = -0.0050)
(tool change at 0.0000 0.0000 0.0000 )
(feed rate xy = F20.00 )
(feed rate z  = F10.00 )
(Settings from pcb-defaults.h)
(Isolate min = 0.0010)
(isolate max = 0.0200)
(isolate step = 0.0050)
(Generated top outlines, top drill, bottom outlines, bottom drill, )
(Unit of measure: inch)
(Inch Mode)
G20
(Inch Mode)
G20
(Absolute Coordinates)
G90
(Absolute Coordinates)
G90
G00 X0.0000 Y0.0000 
M03
G04 P3.000000
M03
G04 P3.000000
G00 Z0.1000 
G00 X-0.9700 Y0.6300 
G01 Z-0.0100 F10.00 
G01 X-1.1100 Y0.6300 F20.00 
G01 X-1.1900 Y0.7100 
G01 X-1.2600 Y0.7100 
G01 X-1.2600 Y0.5000 
G01 X-1.1900 Y0.5000 
G01 X-1.1900 Y0.5100 
G01 X-1.1200 Y0.5800 
G01 X-0.9700 Y0.5800 
G01 X-0.9700 Y0.6300 
G00 Z0.5000 
M05
M02