(.../src/pcbgcode-work/pcb-gcode.ulp)
(Copyright 2005 - 2009 by John Johnson)
(See readme.txt for licensing terms.)
(This file generated from the board:)
(.../pcbgcode-work/docs/examples/enabtmr.brd)
(Current profile is .../pcbgcode-work/profiles/mach.pp  )
(This file generated 12/16/12 5:51 PM)
(Settings from pcb-machine.h)
(  Tool Size)
(0.0050  )
(Z Axis Settings)
(  High     Up        Down     Drill)
(0.5000  	0.1000  	-0.0070 	-0.0320 )
(spindle on time = 3.0000)
(milling depth = -0.0100)
(text depth = -0.0050)
(tool change at 0.5000  0.6000  1.0000  )
(feed rate xy = F20    )
(feed rate z  = F10    )
(Settings from pcb-defaults.h)
(isolate min = 0.0010)
(isolate max = 0.0200)
(isolate step = 0.0030)
(Generated bottom outlines, bottom drill, )
(Unit of measure: inch)
( Tool|       Size       |  Min Sub |  Max Sub |   Count )
( T01 | 0.600mm 0.0236in | 0.0000in | 0.0000in |       0 )
( T02 | 0.813mm 0.0320in | 0.0000in | 0.0000in |       0 )
( T03 | 1.118mm 0.0440in | 0.0000in | 0.0000in |       0 )
( T04 | 1.194mm 0.0470in | 0.0000in | 0.0000in |       0 )
( T05 | 2.800mm 0.1102in | 0.0000in | 0.0000in |       0 )
(Inch Mode)
G20
(Absolute Coordinates)
G90
M05
G00 Z1.0000  
G00 X0.5000  Y0.6000  
M06 T01  ; 0.0236  
G01 Z0.0000  F10    
M06 T01  ; 0.0236  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-1.6400 Y1.2700  Z-0.0320 F10    R0.1000  P1.000000
G82 X-1.9000 Y0.5700  
G82 X-1.9700 Y1.4700  
G82 X-1.9700 Y1.7900  
G82 X-2.2100 Y1.4700  
G82 X-2.2100 Y1.7400  
G82 X-2.5100 Y0.4600  
G82 X-2.5100 Y0.9100  
M05
G00 Z1.0000  
M06 T02  ; 0.0320  
G01 Z0.0000  F10    
M06 T02  ; 0.0320  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.5600 Y0.9100  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.5600 Y1.1100  
G82 X-0.7200 Y1.3100  
G82 X-0.7200 Y1.5100  
G82 X-0.7600 Y1.8600  
G82 X-0.7800 Y0.3400  
G82 X-0.7800 Y0.5400  
G82 X-0.9500 Y0.8100  
G82 X-0.9500 Y0.9100  
G82 X-0.9500 Y1.0100  
G82 X-0.9500 Y1.1100  
G82 X-0.9500 Y1.2100  
G82 X-0.9500 Y1.3100  
G82 X-0.9500 Y1.4100  
G82 X-1.2500 Y0.8100  
G82 X-1.2500 Y0.9100  
G82 X-1.2500 Y1.0100  
G82 X-1.2500 Y1.1100  
G82 X-1.2500 Y1.2100  
G82 X-1.2500 Y1.3100  
G82 X-1.2500 Y1.4100  
G82 X-1.3200 Y0.2000  
G82 X-1.3600 Y1.8600  
G82 X-1.4300 Y0.7100  
G82 X-1.4300 Y1.2100  
G82 X-1.5000 Y1.9100  
G82 X-1.5500 Y0.6600  
G82 X-1.7500 Y0.6600  
G82 X-1.7700 Y1.2000  
G82 X-1.7700 Y1.7000  
G82 X-1.8200 Y0.2000  
G82 X-1.9600 Y1.0100  
G82 X-1.9600 Y1.1100  
G82 X-1.9600 Y1.2100  
G82 X-1.9600 Y1.3100  
G82 X-2.0000 Y1.9100  
G82 X-2.1400 Y0.2600  
G82 X-2.2600 Y1.0100  
G82 X-2.2600 Y1.1100  
G82 X-2.2600 Y1.2100  
G82 X-2.2600 Y1.3100  
G82 X-2.3000 Y1.4400  
G82 X-2.3400 Y1.7400  
G82 X-2.3900 Y1.6650  
G82 X-2.4400 Y1.7400  
G82 X-2.6400 Y0.2600  
G82 X-2.6600 Y1.6100  
G82 X-2.6700 Y0.7500  
G82 X-2.6700 Y1.2500  
G82 X-2.6700 Y1.7200  
G82 X-2.6700 Y1.8200  
G82 X-2.9000 Y1.4400  
G82 X-2.9500 Y1.1300  
G82 X-2.9500 Y1.3300  
G82 X-3.1600 Y1.6100  
M05
G00 Z1.0000  
M06 T03  ; 0.0440  
G01 Z0.0000  F10    
M06 T03  ; 0.0440  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-1.4200 Y0.3400  Z-0.0320 F10    R0.1000  P1.000000
G82 X-1.4200 Y0.5000  
G82 X-1.5000 Y1.3100  
G82 X-1.5000 Y1.7100  
G82 X-1.8200 Y0.3400  
G82 X-1.8200 Y0.5000  
G82 X-2.0100 Y0.2600  
G82 X-2.0100 Y0.6600  
M05
G00 Z1.0000  
M06 T04  ; 0.0470  
G01 Z0.0000  F10    
M06 T04  ; 0.0470  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.2000 Y0.7116  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.2000 Y0.9084  
G82 X-0.2000 Y1.1116  
G82 X-0.2000 Y1.3084  
G82 X-0.2000 Y1.5916  
G82 X-0.2000 Y1.7884  
G82 X-2.9200 Y0.5516  
G82 X-2.9200 Y0.7484  
M05
G00 Z1.0000  
M06 T05  ; 0.1102  
G01 Z0.0000  F10    
M06 T05  ; 0.1102  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.2200 Y0.1800  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.2300 Y2.0300  
G82 X-3.0700 Y0.1900  
G82 X-3.0700 Y2.0100  
T01 
G00 Z0.5000  
M05
M02