(.../Documents/src/3.6.0.2/pcb-gcode.ulp)
(Copyright 2005 - 2012 by John Johnson)
(See readme.txt for licensing terms.)
(This file generated from the board:)
(.../docs/examples/04151_lcdi2c.brd)
(Current profile is .../pcbgcode-work/profiles/mach.pp  )
(This file generated 12/28/12 11:20 PM)
(Settings from pcb-machine.h)
(  Tool Size)
(0.0070  )
(Z Axis Settings)
(  High     Up        Down     Drill)
(0.5000  	0.1000  	-0.0070 	-0.0320 )
(spindle on time = 3.0000)
(milling depth = -0.0100)
(text depth = -0.0050)
(tool change at 0.5000  0.6000  1.0000  )
(feed rate xy = F20    )
(feed rate z  = F10    )
(Settings from pcb-defaults.h)
(isolate min = 0.0010)
(isolate max = 0.0200)
(isolate step = 0.0050)
(Generated bottom outlines, bottom drill, )
(Unit of measure: inch)
( Tool|       Size       |  Min Sub |  Max Sub |   Count )
( T02 | 0.813mm 0.0320in | 0.0320in | 0.0320in |      49 )
( T03 | 1.016mm 0.0400in | 0.0400in | 0.0400in |      17 )
( T06 | 2.159mm 0.0850in | 0.0850in | 0.1250in |       5 )
(Inch Mode)
G20
(Absolute Coordinates)
G90
M05
G00 Z1.0000  
G00 X0.5000  Y0.6000  
M06 T02  ; 0.0320  
G01 Z0.0000  F10    
M06 T01  ; 0.0320  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.4100 Y1.0000  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.5100 Y1.0000  
G82 X-0.6000 Y0.2700  
G82 X-0.7234 Y0.6709  
G82 X-0.7628 Y0.7891  
G82 X-0.8000 Y0.3700  
G82 X-0.8021 Y0.6709  
G82 X-0.8415 Y0.7891  
G82 X-0.8809 Y0.6709  
G82 X-0.9202 Y0.7891  
G82 X-1.1000 Y0.2700  
G82 X-1.1300 Y1.1800  
G82 X-1.2300 Y1.1800  
G82 X-1.2700 Y0.2300  
G82 X-1.2700 Y0.3400  
G82 X-1.2700 Y0.4400  
G82 X-1.2700 Y0.5400  
G82 X-1.2700 Y0.6400  
G82 X-1.2700 Y0.7400  
G82 X-1.2700 Y0.8400  
G82 X-1.2700 Y0.9400  
G82 X-1.2700 Y1.0400  
G82 X-1.3700 Y0.2300  
G82 X-1.3900 Y1.1700  
G82 X-1.4400 Y1.2450  
G82 X-1.4900 Y1.1700  
G82 X-1.5700 Y0.3400  
G82 X-1.5700 Y0.4400  
G82 X-1.5700 Y0.5400  
G82 X-1.5700 Y0.6400  
G82 X-1.5700 Y0.7400  
G82 X-1.5700 Y0.8400  
G82 X-1.5700 Y0.9400  
G82 X-1.5700 Y1.0400  
G82 X-1.7500 Y1.1200  
G82 X-1.7500 Y1.2200  
G82 X-1.8000 Y0.4800  
G82 X-1.8000 Y0.6800  
G82 X-1.8500 Y0.1500  
G82 X-1.8500 Y0.2500  
G82 X-1.8500 Y0.3500  
G82 X-1.9200 Y0.4800  
G82 X-1.9200 Y0.6800  
G82 X-2.0400 Y0.4800  
G82 X-2.0400 Y0.6800  
G82 X-2.1500 Y0.1500  
G82 X-2.1500 Y0.2500  
G82 X-2.1500 Y0.3500  
M05
G00 Z1.0000  
M06 T03  ; 0.0400  
G01 Z0.0000  F10    
M06 T02  ; 0.0400  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.1900 Y0.4000  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.1900 Y0.5000  
G82 X-0.1900 Y0.6000  
G82 X-0.1900 Y0.7000  
G82 X-0.1900 Y0.8000  
G82 X-0.1900 Y0.9000  
G82 X-0.1900 Y1.0000  
G82 X-0.2900 Y0.4000  
G82 X-0.2900 Y0.5000  
G82 X-0.2900 Y0.6000  
G82 X-0.2900 Y0.7000  
G82 X-0.2900 Y0.8000  
G82 X-0.2900 Y0.9000  
G82 X-0.2900 Y1.0000  
G82 X-2.0000 Y1.0300  
G82 X-2.3000 Y1.0300  
M05
G00 Z1.0000  
M06 T06  ; 0.0850  
G01 Z0.0000  F10    
M06 T03  ; 0.0850  
G00 Z0.1000  
M03
G04 P3.000000
G82 X-0.1500 Y0.1300  Z-0.0320 F10    R0.1000  P1.000000
G82 X-0.1500 Y1.1900  
G82 X-0.5029 Y0.7576  
G82 X-1.1171 Y0.7576  
T01 
G00 Z0.5000  
M05
M02