//
// For ease of use, and to avoid overwritting your settings,
// use pcb-gcode-setup to make changes to these settings.
//

real DEFAULT_Z_HIGH = 12.700000;
real DEFAULT_Z_UP = 2.540000;
real DEFAULT_Z_DOWN = -0.177800;
real DRILL_DEPTH = -0.812800;
real DRILL_DWELL = 1.000000;
real SPINDLE_ON_TIME = 3.000000;
real MILLING_DEPTH = -0.254000;
real TEXT_DEPTH = -0.127000;
real TOOL_CHANGE_POS_X = 12.700000;
real TOOL_CHANGE_POS_Y = 15.240000;
real TOOL_CHANGE_POS_Z = 25.400000;
real FEED_RATE = 508.000000;
real FEED_RATE_Z = 254.000000;
real DEFAULT_WIDTH = 1.000000;
real X_OFFSET = 0.000000;
real Y_OFFSET = 0.000000;
real X_HOME = 0.000000;
real Y_HOME = 0.000000;
real EPSILON = 0.002540;