daily_automated

2023-03-17 11:59:21 +00:00
parent 252ecca9cf
commit e2f276193e
4496 changed files with 1178007 additions and 0 deletions
--- a/trunk/Arduino/libraries/MultiLCD/examples/SDInfo/SDInfo.ino
+++ b/trunk/Arduino/libraries/MultiLCD/examples/SDInfo/SDInfo.ino
@@ -0,0 +1,89 @@
+#include <SPI.h>
+#include <SD.h>
+#include <Wire.h>
+#include <MultiLCD.h>
+
+// set up variables using the SD utility library functions:
+Sd2Card card;
+SdVolume volume;
+SdFile root;
+
+const int chipSelect = 10;
+
+// set up access to LCD screen
+LCD_ILI9341 lcd;
+
+void setup()
+{
+  lcd.begin();
+  lcd.setFont(FONT_SIZE_SMALL);
+  lcd.setTextColor(RGB16_YELLOW);
+  lcd.println("Initializing SD card...");
+
+  pinMode(chipSelect, OUTPUT);
+
+  // we'll use the initialization code from the utility libraries
+  // since we're just testing if the card is working!
+  if (!card.init(SPI_FULL_SPEED, chipSelect)) {
+    lcd.setTextColor(RGB16_RED);
+    lcd.println("\nInitialization failed. Things to check:");
+    lcd.setTextColor(RGB16_WHITE);
+    lcd.println("* Is a card is inserted?");
+    lcd.println("* Is your wiring correct?");
+    lcd.println("* Does the chipSelect pin match your shield?");
+    return;
+  } else {
+    lcd.setTextColor(RGB16_CYAN);
+    lcd.println("Wiring is correct and a card is present.");
+  }
+
+  // print the type of card
+  lcd.setTextColor(RGB16_GREEN);
+  lcd.print("\nCard Type: ");
+  switch(card.type()) {
+    case SD_CARD_TYPE_SD1:
+      lcd.println("SD1");
+      break;
+    case SD_CARD_TYPE_SD2:
+      lcd.println("SD2");
+      break;
+    case SD_CARD_TYPE_SDHC:
+      lcd.println("SDHC");
+      break;
+    default:
+      lcd.println("Unknown");
+  }
+
+  lcd.setTextColor(RGB16_WHITE);
+  // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
+  if (!volume.init(card)) {
+    lcd.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
+    return;
+  }
+
+  // print the type and size of the first FAT-type volume
+  uint32_t volumesize;
+  lcd.print("\nVolume Type: FAT");
+  lcd.println(volume.fatType(), DEC);
+  lcd.println();
+
+  volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
+  volumesize *= volume.clusterCount();       // we'll have a lot of clusters
+  volumesize *= 512;                            // SD card blocks are always 512 bytes
+  lcd.print("Volume size: ");
+  lcd.print(volumesize);
+  lcd.print(" bytes (");
+  lcd.print(volumesize >> 20);
+  lcd.println("MB)");
+
+  lcd.println("\nFiles found on SD (name, date and size in bytes)");
+  root.openRoot(volume);
+
+  // list all files in the card with date and size
+  root.ls(LS_R | LS_DATE | LS_SIZE);
+}
+
+
+void loop(void)
+{
+}