daily_automated

2023-03-17 11:59:21 +00:00
parent 252ecca9cf
commit e2f276193e
4496 changed files with 1178007 additions and 0 deletions
--- a/trunk/Arduino/libraries/MultiLCD/PCD8544.h
+++ b/trunk/Arduino/libraries/MultiLCD/PCD8544.h
@@ -0,0 +1,117 @@
+/*
+ * PCD8544 - Interface with Philips PCD8544 (or compatible) LCDs.
+ *
+ * Copyright (c) 2010 Carlos Rodrigues <cefrodrigues@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+#ifndef PCD8544_H
+#define PCD8544_H
+
+
+#if ARDUINO < 100
+#include <WProgram.h>
+#else
+#include <Arduino.h>
+#endif
+
+// Chip variants supported...
+#define CHIP_PCD8544 0
+#define CHIP_ST7576  1
+
+#define PCD8544_WIDTH 84
+#define PCD8544_HEIGHT 48
+
+#define PCD8544_CMD  LOW
+#define PCD8544_DATA HIGH
+
+class PCD8544: public Print {
+    public:
+        // All the pins can be changed from the default values...
+        PCD8544(unsigned char sclk  = 2,   /* clock       (display pin 2) */
+                unsigned char sdin  = 3,   /* data-in     (display pin 3) */
+                unsigned char dc    = 4,   /* data select (display pin 4) */
+                unsigned char reset = 6,   /* reset       (display pin 8) */
+                unsigned char sce   = 5);  /* enable      (display pin 5) */
+
+        // Display initialization (dimensions in pixels)...
+        void begin(unsigned char model=CHIP_PCD8544);
+        void stop();
+
+        // Erase everything on the display...
+        void clear();
+        void clearLine();  // ...or just the current line
+
+        // Control the display's power state...
+        void setPower(bool on);
+
+        // For compatibility with the LiquidCrystal library...
+        void display();
+        void noDisplay();
+
+        // Activate white-on-black mode (whole display)...
+        void setInverse(bool inverse);
+
+        // Place the cursor at the start of the current line...
+        void home();
+
+        // Place the cursor at position (column, line)...
+        void setCursor(unsigned char column, unsigned char line);
+
+        // Assign a user-defined glyph (5x8) to an ASCII character (0-31)...
+        void createChar(unsigned char chr, const unsigned char *glyph);
+
+        // Write an ASCII character at the current cursor position (7-bit)...
+#if ARDUINO < 100
+        virtual void write(uint8_t chr);
+#else
+        virtual size_t write(uint8_t chr);
+#endif
+
+        // Draw a chart element at the current cursor position...
+        void drawColumn(unsigned char lines, unsigned char value);
+
+        void draw8x8(const unsigned char *data);
+        void draw16x16(const unsigned char *data);
+
+    protected:
+        // Current cursor position...
+        unsigned char column;
+        unsigned char line;
+        // Send a command or data to the display...
+        void send(unsigned char type, unsigned char data);
+
+    private:
+        unsigned char pin_sclk;
+        unsigned char pin_sdin;
+        unsigned char pin_dc;
+        unsigned char pin_reset;
+        unsigned char pin_sce;
+
+        // User-defined glyphs (below the ASCII space character)...
+        const unsigned char *custom[' '];
+};
+
+
+#endif  /* PCD8544_H */
+
+
+/* vim: set expandtab ts=4 sw=4: */