daily_automated

2023-03-17 11:59:21 +00:00
parent 252ecca9cf
commit e2f276193e
4496 changed files with 1178007 additions and 0 deletions
--- a/trunk/Arduino/libraries/IRremote/examples/IRsendRawDemo/IRsendRawDemo.ino
+++ b/trunk/Arduino/libraries/IRremote/examples/IRsendRawDemo/IRsendRawDemo.ino
@@ -0,0 +1,64 @@
+/*
+ * IRremote: IRsendRawDemo - demonstrates sending IR codes with sendRaw
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ *
+ * IRsendRawDemo - added by AnalysIR (via www.AnalysIR.com), 24 August 2015
+ *
+ * This example shows how to send a RAW signal using the IRremote library.
+ * The example signal is actually a 32 bit NEC signal.
+ * Remote Control button: LGTV Power On/Off.
+ * Hex Value: 0x20DF10EF, 32 bits
+ *
+ * It is more efficient to use the sendNEC function to send NEC signals.
+ * Use of sendRaw here, serves only as an example of using the function.
+ *
+ */
+
+#include <IRremote.h>
+
+IRsend IrSender;
+
+// On the Zero and others we switch explicitly to SerialUSB
+#if defined(ARDUINO_ARCH_SAMD)
+#define Serial SerialUSB
+#endif
+
+void setup() {
+    pinMode(LED_BUILTIN, OUTPUT);
+
+    Serial.begin(115200);
+#if defined(__AVR_ATmega32U4__) || defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
+    delay(2000); // To be able to connect Serial monitor after reset and before first printout
+#endif
+    // Just to know which program is running on my Arduino
+    Serial.println(F("START " __FILE__ " from " __DATE__));
+    Serial.print(F("Ready to send IR signals at pin "));
+    Serial.println(IR_SEND_PIN);
+}
+
+void loop() {
+    int khz = 38; // 38kHz carrier frequency for the NEC protocol
+    /*
+     * Send data from RAM
+     */
+    unsigned int irSignal[] = { 9000, 4500, 560, 560, 560, 560, 560, 1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 560, 560,
+            1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 560, 560, 560, 560,
+            1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560,
+            1690, 560, 1690, 560, 39416, 9000, 2210, 560 }; // AnalysIR Batch Export (IRremote) - RAW
+    IrSender.sendRaw(irSignal, sizeof(irSignal) / sizeof(irSignal[0]), khz); // Note the approach used to automatically calculate the size of the array.
+
+    delay(2000);
+    /*
+     * Send data direct from FLASH
+     */
+    unsigned int irSignalP[] PROGMEM = { 9000, 4500, 560, 560, 560, 560, 560, 1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 560,
+            560, 1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 560, 560, 560,
+            560, 1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560,
+            1690, 560, 1690, 560, 39416, 9000, 2210, 560 }; // AnalysIR Batch Export (IRremote) - RAW
+    IrSender.sendRaw_P(irSignalP, sizeof(irSignalP) / sizeof(irSignalP[0]), khz); // Note the approach used to automatically calculate the size of the array.
+
+    delay(5000); //In this example, the signal will be repeated every 7 seconds, approximately.
+}