daily_automated

trunk/Arduino/libraries/IRremote/examples/IRreceiveDumpV2/IRreceiveDumpV2.ino

@@ -0,0 +1,163 @@
+//------------------------------------------------------------------------------
+// Include the IRremote library header
+//
+#include <IRremote.h>
+
+//------------------------------------------------------------------------------
+// Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838)
+//
+#if defined(ESP32)
+int IR_RECEIVE_PIN = 15;
+#else
+int IR_RECEIVE_PIN = 11;
+#endif
+IRrecv IrReceiver(IR_RECEIVE_PIN);
+
+//+=============================================================================
+// Configure the Arduino
+//
+void setup() {
+    pinMode(LED_BUILTIN, OUTPUT);
+
+    Serial.begin(115200);   // Status message will be sent to PC at 9600 baud
+#if defined(__AVR_ATmega32U4__) || defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
+    delay(2000); // To be able to connect Serial monitor after reset and before first printout
+#endif
+    // Just to know which program is running on my Arduino
+    Serial.println(F("START " __FILE__ " from " __DATE__));
+
+    IrReceiver.enableIRIn();  // Start the receiver
+    IrReceiver.blink13(true); // Enable feedback LED
+
+    Serial.print(F("Ready to receive IR signals at pin "));
+    Serial.println(IR_RECEIVE_PIN);
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void dumpInfo() {
+    // Check if the buffer overflowed
+    if (IrReceiver.results.overflow) {
+        Serial.println("IR code too long. Edit IRremoteInt.h and increase RAW_BUFFER_LENGTH");
+        return;
+    }
+
+    IrReceiver.printResultShort(&Serial);
+
+    Serial.print(" (");
+    Serial.print(IrReceiver.results.bits, DEC);
+    Serial.println(" bits)");
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void dumpRaw() {
+    // Print Raw data
+    Serial.print("Timing[");
+    Serial.print(IrReceiver.results.rawlen - 1, DEC);
+    Serial.println("]: ");
+
+    for (unsigned int i = 1; i < IrReceiver.results.rawlen; i++) {
+        unsigned long x = IrReceiver.results.rawbuf[i] * MICROS_PER_TICK;
+        if (!(i & 1)) {  // even
+            Serial.print("-");
+            if (x < 1000) {
+                Serial.print(" ");
+            }
+            if (x < 100) {
+                Serial.print(" ");
+            }
+            Serial.print(x, DEC);
+        } else {  // odd
+            Serial.print("     ");
+            Serial.print("+");
+            if (x < 1000) {
+                Serial.print(" ");
+            }
+            if (x < 100) {
+                Serial.print(" ");
+            }
+            Serial.print(x, DEC);
+            if (i < IrReceiver.results.rawlen - 1) {
+                Serial.print(", "); //',' not needed for last one
+            }
+        }
+        if (!(i % 8)) {
+            Serial.println("");
+        }
+    }
+    Serial.println("");                    // Newline
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void dumpCode() {
+    // Start declaration
+    Serial.print("unsigned int  ");          // variable type
+    Serial.print("rawData[");                // array name
+    Serial.print(IrReceiver.results.rawlen - 1, DEC);  // array size
+    Serial.print("] = {");                   // Start declaration
+
+    // Dump data
+    for (unsigned int i = 1; i < IrReceiver.results.rawlen; i++) {
+        Serial.print(IrReceiver.results.rawbuf[i] * MICROS_PER_TICK, DEC);
+        if (i < IrReceiver.results.rawlen - 1)
+            Serial.print(","); // ',' not needed on last one
+        if (!(i & 1))
+            Serial.print(" ");
+    }
+
+    // End declaration
+    Serial.print("};");  //
+
+    // Comment
+    Serial.print("  // ");
+    IrReceiver.printResultShort(&Serial);
+
+    // Newline
+    Serial.println("");
+
+    // Now dump "known" codes
+    if (IrReceiver.results.decode_type != UNKNOWN) {
+
+        // Some protocols have an address
+        if(IrReceiver.results.address != 0){
+            Serial.print("unsigned int  addr = 0x");
+            Serial.print(IrReceiver.results.address, HEX);
+            Serial.println(";");
+        }
+
+        // All protocols have data
+        Serial.print("unsigned int  data = 0x");
+        Serial.print(IrReceiver.results.value, HEX);
+        Serial.println(";");
+        Serial.println();
+    }
+}
+
+//+=============================================================================
+// Dump out the raw data as Pronto Hex.
+//
+void dumpPronto() {
+    Serial.print("Pronto Hex: ");
+    IrReceiver.dumpPronto(Serial);
+    Serial.println();
+}
+
+//+=============================================================================
+// The repeating section of the code
+//
+void loop() {
+    if (IrReceiver.decode()) {  // Grab an IR code
+        dumpInfo();           // Output the results
+        dumpRaw();            // Output the results in RAW format
+        dumpCode();           // Output the results as source code
+        dumpPronto();
+        Serial.println();           // 2 blank lines between entries
+        Serial.println();
+        IrReceiver.resume();              // Prepare for the next value
+    }
+}