daily_automated

2023-03-17 11:59:21 +00:00
parent 252ecca9cf
commit e2f276193e
4496 changed files with 1178007 additions and 0 deletions
--- a/trunk/Arduino/libraries/IRremote/examples/IRreceiveDump/IRreceiveDump.ino
+++ b/trunk/Arduino/libraries/IRremote/examples/IRreceiveDump/IRreceiveDump.ino
@@ -0,0 +1,78 @@
+/*
+ * IRremote: IRreceiveDump - dump details of IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+ * LG added by Darryl Smith (based on the JVC protocol)
+ */
+
+#include <IRremote.h>
+
+/*
+ *  Default is Arduino pin D11.
+ *  You can change this to another available Arduino Pin.
+ *  Your IR receiver should be connected to the pin defined here
+ */
+#if defined(ESP32)
+int IR_RECEIVE_PIN = 15;
+#else
+int IR_RECEIVE_PIN = 11;
+#endif
+
+IRrecv IrReceiver(IR_RECEIVE_PIN);
+
+// On the Zero and others we switch explicitly to SerialUSB
+#if defined(ARDUINO_ARCH_SAMD)
+#define Serial SerialUSB
+#endif
+
+void setup() {
+    pinMode(LED_BUILTIN, OUTPUT);
+
+    Serial.begin(115200);
+#if defined(__AVR_ATmega32U4__) || defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
+    delay(2000); // To be able to connect Serial monitor after reset and before first printout
+#endif
+    // Just to know which program is running on my Arduino
+    Serial.println(F("START " __FILE__ " from " __DATE__));
+    IrReceiver.enableIRIn();  // Start the receiver
+    IrReceiver.blink13(true); // Enable feedback LED
+
+    Serial.print(F("Ready to receive IR signals at pin "));
+    Serial.println(IR_RECEIVE_PIN);
+}
+
+void dump() {
+    // Dumps out the decode_results structure.
+    // Call this after IRrecv::decode()
+    int count = IrReceiver.results.rawlen;
+    IrReceiver.printResultShort(&Serial);
+
+    Serial.print(" (");
+    Serial.print(IrReceiver.results.bits, DEC);
+    Serial.println(" bits)");
+    Serial.print("Raw [");
+    Serial.print(count, DEC);
+    Serial.print("]: ");
+
+    for (int i = 0; i < count; i++) {
+        if (i & 1) {
+            Serial.print(IrReceiver.results.rawbuf[i] * MICROS_PER_TICK, DEC);
+        } else {
+            Serial.write('-');
+            Serial.print((unsigned long) IrReceiver.results.rawbuf[i] * MICROS_PER_TICK, DEC);
+        }
+        Serial.print(" ");
+    }
+    Serial.println();
+}
+
+void loop() {
+    if (IrReceiver.decode()) {
+        Serial.println();
+        dump();
+        IrReceiver.resume(); // Receive the next value
+    }
+}