daily_automated

trunk/Arduino/libraries/IRremote/examples/IRreceiveDemo/IRreceiveDemo.ino

@@ -0,0 +1,53 @@
+/*
+ * IRremote: IRreceiveDemo - demonstrates receiving IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+#if defined(ESP32)
+int IR_RECEIVE_PIN = 15;
+#elif defined(ARDUINO_AVR_PROMICRO)
+int IR_RECEIVE_PIN = 10;
+#else
+int IR_RECEIVE_PIN = 11;
+#endif
+IRrecv IrReceiver(IR_RECEIVE_PIN);
+
+// On the Zero and others we switch explicitly to SerialUSB
+#if defined(ARDUINO_ARCH_SAMD)
+#define Serial SerialUSB
+#endif
+
+void setup() {
+    pinMode(LED_BUILTIN, OUTPUT);
+
+    Serial.begin(115200);
+#if defined(__AVR_ATmega32U4__) || defined(SERIAL_USB) || defined(SERIAL_PORT_USBVIRTUAL)
+    delay(2000); // To be able to connect Serial monitor after reset and before first printout
+#endif
+    // Just to know which program is running on my Arduino
+    Serial.println(F("START " __FILE__ " from " __DATE__));
+
+    // In case the interrupt driver crashes on setup, give a clue
+    // to the user what's going on.
+    Serial.println("Enabling IRin");
+    IrReceiver.enableIRIn();  // Start the receiver
+    IrReceiver.blink13(true); // Enable feedback LED
+
+    Serial.print(F("Ready to receive IR signals at pin "));
+    Serial.println(IR_RECEIVE_PIN);
+}
+
+void loop() {
+    if (IrReceiver.decode()) {
+        IrReceiver.printResultShort(&Serial);
+        Serial.println();
+
+        IrReceiver.resume(); // Receive the next value
+    }
+    delay(100);
+}