topicchi/SyncHome
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Browse Source
This commit is contained in:
topicchi
2024-09-24 16:54:39 +00:00
parent e3ca99e4db
commit c7a68c0205
332 changed files with 6098 additions and 4139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
trunk/Arduino/libraries/Servo/examples/Knob/readme.md
View File

@@ -13,7 +13,7 @@ This example makes use of the Arduino `Servo` library.
## Circuit
Servo motors have three wires: power, ground, and signal. The power wire is typically red, and should be connected to the 5V pin on the Arduino or Genuino board. The ground wire is typically black or brown and should be connected to a ground pin on the board. The signal pin is typically yellow or orange and should be connected to pin 9 on the board.
Servo motors have three wires: power, ground, and signal. The power wire is typically red, and should be connected to the 5V pin on the Arduino board. The ground wire is typically black or brown and should be connected to a ground pin on the board. The signal pin is typically yellow or orange and should be connected to pin 9 on the board.
The potentiometer should be wired so that its two outer pins are connected to power (+5V) and ground, and its middle pin is connected to analog input 0 on the board.