topicchi/SyncHome
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Browse Source
This commit is contained in:
topicchi
2024-09-24 16:54:39 +00:00
parent e3ca99e4db
commit c7a68c0205
332 changed files with 6098 additions and 4139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

74
trunk/Arduino/libraries/SdFat/examples/SdFormatter/SdFormatter.ino
View File

@@ -31,7 +31,7 @@ const int8_t DISABLE_CS_PIN = -1;
// SDCARD_SS_PIN is defined for the built-in SD on some boards.
#ifndef SDCARD_SS_PIN
const uint8_t SD_CS_PIN = SS;
#else // SDCARD_SS_PIN
#else // SDCARD_SS_PIN
// Assume built-in SD is used.
const uint8_t SD_CS_PIN = SDCARD_SS_PIN;
#endif // SDCARD_SS_PIN
@@ -42,7 +42,7 @@ const uint8_t SD_CS_PIN = SDCARD_SS_PIN;
// Try to select the best SD card configuration.
#if HAS_SDIO_CLASS
#define SD_CONFIG SdioConfig(FIFO_SDIO)
#elif ENABLE_DEDICATED_SPI
#elif ENABLE_DEDICATED_SPI
#define SD_CONFIG SdSpiConfig(SD_CS_PIN, DEDICATED_SPI, SPI_CLOCK)
#else // HAS_SDIO_CLASS
#define SD_CONFIG SdSpiConfig(SD_CS_PIN, SHARED_SPI, SPI_CLOCK)
@@ -52,14 +52,18 @@ const uint8_t SD_CS_PIN = SDCARD_SS_PIN;
ArduinoOutStream cout(Serial);
//------------------------------------------------------------------------------
uint32_t cardSectorCount = 0;
uint8_t sectorBuffer[512];
uint8_t sectorBuffer[512];
//------------------------------------------------------------------------------
// SdCardFactory constructs and initializes the appropriate card.
SdCardFactory cardFactory;
// Pointer to generic SD card.
SdCard* m_card = nullptr;
//------------------------------------------------------------------------------
#define sdError(msg) {cout << F("error: ") << F(msg) << endl; sdErrorHalt();}
#define sdError(msg) \
{ \
cout << F("error: ") << F(msg) << endl; \
sdErrorHalt(); \
}
//------------------------------------------------------------------------------
void sdErrorHalt() {
if (!m_card) {
@@ -73,7 +77,8 @@ void sdErrorHalt() {
cout << F(" = ") << int(m_card->errorCode()) << endl;
cout << F("SD errorData = ") << int(m_card->errorData()) << endl;
}
while (true) {}
while (true) {
}
}
//------------------------------------------------------------------------------
void clearSerialInput() {
@@ -102,7 +107,7 @@ void eraseCard() {
sdError("erase failed");
}
cout << '.';
if ((n++)%64 == 63) {
if ((n++) % 64 == 63) {
cout << endl;
}
firstBlock += ERASE_SIZE;
@@ -123,9 +128,9 @@ void formatCard() {
FatFormatter fatFormatter;
// Format exFAT if larger than 32GB.
bool rtn = cardSectorCount > 67108864 ?
exFatFormatter.format(m_card, sectorBuffer, &Serial) :
fatFormatter.format(m_card, sectorBuffer, &Serial);
bool rtn = cardSectorCount > 67108864
? exFatFormatter.format(m_card, sectorBuffer, &Serial)
: fatFormatter.format(m_card, sectorBuffer, &Serial);
if (!rtn) {
sdErrorHalt();
@@ -136,8 +141,8 @@ void formatCard() {
void printConfig(SdSpiConfig config) {
if (DISABLE_CS_PIN < 0) {
cout << F(
"\nAssuming the SD is the only SPI device.\n"
"Edit DISABLE_CS_PIN to disable an SPI device.\n");
"\nAssuming the SD is the only SPI device.\n"
"Edit DISABLE_CS_PIN to disable an SPI device.\n");
} else {
cout << F("\nDisabling SPI device on pin ");
cout << int(DISABLE_CS_PIN) << endl;
@@ -169,19 +174,19 @@ void setup() {
clearSerialInput();
cout << F(
"\n"
"This program can erase and/or format SD/SDHC/SDXC cards.\n"
"\n"
"Erase uses the card's fast flash erase command.\n"
"Flash erase sets all data to 0X00 for most cards\n"
"and 0XFF for a few vendor's cards.\n"
"\n"
"Cards up to 2 GiB (GiB = 2^30 bytes) will be formated FAT16.\n"
"Cards larger than 2 GiB and up to 32 GiB will be formatted\n"
"FAT32. Cards larger than 32 GiB will be formatted exFAT.\n"
"\n"
"Warning, all data on the card will be erased.\n"
"Enter 'Y' to continue: ");
"\n"
"This program can erase and/or format SD/SDHC/SDXC cards.\n"
"\n"
"Erase uses the card's fast flash erase command.\n"
"Flash erase sets all data to 0X00 for most cards\n"
"and 0XFF for a few vendor's cards.\n"
"\n"
"Cards up to 2 GiB (GiB = 2^30 bytes) will be formated FAT16.\n"
"Cards larger than 2 GiB and up to 32 GiB will be formatted\n"
"FAT32. Cards larger than 32 GiB will be formatted exFAT.\n"
"\n"
"Warning, all data on the card will be erased.\n"
"Enter 'Y' to continue: ");
while (!Serial.available()) {
yield();
}
@@ -207,9 +212,9 @@ void setup() {
return;
}
cout << F("\nCard size: ") << cardSectorCount*5.12e-7;
cout << F("\nCard size: ") << cardSectorCount * 5.12e-7;
cout << F(" GB (GB = 1E9 bytes)\n");
cout << F("Card size: ") << cardSectorCount/2097152.0;
cout << F("Card size: ") << cardSectorCount / 2097152.0;
cout << F(" GiB (GiB = 2^30 bytes)\n");
cout << F("Card will be formated ");
@@ -221,13 +226,13 @@ void setup() {
cout << F("FAT16\n");
}
cout << F(
"\n"
"Options are:\n"
"E - erase the card and skip formatting.\n"
"F - erase and then format the card. (recommended)\n"
"Q - quick format the card without erase.\n"
"\n"
"Enter option: ");
"\n"
"Options are:\n"
"E - erase the card and skip formatting.\n"
"F - erase and then format the card. (recommended)\n"
"Q - quick format the card without erase.\n"
"\n"
"Enter option: ");
while (!Serial.available()) {
yield();
@@ -245,5 +250,4 @@ void setup() {
formatCard();
}
}
void loop() {
}
void loop() {}