topicchi/SyncHome
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Browse Source
This commit is contained in:
topicchi
2024-09-24 16:54:39 +00:00
parent e3ca99e4db
commit c7a68c0205
332 changed files with 6098 additions and 4139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
trunk/Arduino/libraries/EspSoftwareSerial/examples/repeater/repeater.ino
View File

@@ -1,26 +1,28 @@
#include <SoftwareSerial.h>
// On ESP8266:
// SoftwareSerial loopback for remote source (loopback.ino), or hardware loopback.
// EspSoftwareSerial loopback for remote source (loopback.ino), or hardware loopback.
// Connect source D5 (rx) to local D8 (tx), source D6 (tx) to local D7 (rx).
// Hint: The logger is run at 9600bps such that enableIntTx(true) can remain unchanged. Blocking
// interrupts severely impacts the ability of the SoftwareSerial devices to operate concurrently
// interrupts severely impacts the ability of the EspSoftwareSerial devices to operate concurrently
// and/or in duplex mode.
// On ESP32:
// For software or hardware loopback, connect source rx to local D8 (tx), source tx to local D7 (rx).
#ifndef D5
#if defined(ESP8266)
#define D5 (14)
#define D6 (12)
#define D7 (13)
#define D8 (15)
#define D5 (14)
#define D7 (13)
#define D6 (12)
#define RX (3)
#define TX (1)
#elif defined(ESP32)
#define D5 (18)
#define D6 (19)
#define D7 (23)
#define D8 (5)
#define D5 (18)
#define D7 (23)
#define D6 (19)
#define RX (3)
#define TX (1)
#endif
#endif
@@ -35,11 +37,11 @@ constexpr int IUTBITRATE = 19200;
#endif
#if defined(ESP8266)
constexpr SoftwareSerialConfig swSerialConfig = SWSERIAL_8E1;
constexpr SerialConfig hwSerialConfig = SERIAL_8E1;
constexpr EspSoftwareSerial::Config swSerialConfig = EspSoftwareSerial::SWSERIAL_8E1;
constexpr SerialConfig hwSerialConfig = ::SERIAL_8E1;
#elif defined(ESP32)
constexpr SoftwareSerialConfig swSerialConfig = SWSERIAL_8E1;
constexpr uint32_t hwSerialConfig = SERIAL_8E1;
constexpr EspSoftwareSerial::Config swSerialConfig = EspSoftwareSerial::SWSERIAL_8E1;
constexpr uint32_t hwSerialConfig = ::SERIAL_8E1;
#else
constexpr unsigned swSerialConfig = 3;
#endif
@@ -58,30 +60,30 @@ constexpr int ReportInterval = IUTBITRATE / 8;
#if defined(ESP8266)
#if defined(HWLOOPBACK)
HardwareSerial& repeater(Serial);
SoftwareSerial logger;
EspSoftwareSerial::UART logger;
#else
SoftwareSerial repeater;
EspSoftwareSerial::UART repeater;
HardwareSerial& logger(Serial);
#endif
#elif defined(ESP32)
#if defined(HWLOOPBACK)
HardwareSerial& repeater(Serial2);
#else
SoftwareSerial repeater;
EspSoftwareSerial::UART repeater;
#endif
HardwareSerial& logger(Serial);
#else
SoftwareSerial repeater(14, 12);
EspSoftwareSerial::UART repeater(14, 12);
HardwareSerial& logger(Serial);
#endif
void setup() {
#if defined(ESP8266)
#if defined(HWLOOPBACK)
repeater.begin(IUTBITRATE, hwSerialConfig, SERIAL_FULL, 1, invert);
repeater.begin(IUTBITRATE, hwSerialConfig, ::SERIAL_FULL, 1, invert);
repeater.swap();
repeater.setRxBufferSize(2 * BLOCKSIZE);
logger.begin(9600, SWSERIAL_8N1, -1, TX);
logger.begin(9600, EspSoftwareSerial::SWSERIAL_8N1, -1, TX);
#else
repeater.begin(IUTBITRATE, swSerialConfig, D7, D8, invert, 4 * BLOCKSIZE);
#ifdef HALFDUPLEX
@@ -105,7 +107,7 @@ void setup() {
logger.begin(9600);
#endif
logger.println(PSTR("Repeater example for EspSoftwareSerial"));
logger.println(PSTR("Repeater example for EspEspSoftwareSerial"));
start = micros();
rxCount = 0;
seqErrors = 0;