This commit is contained in:
paolo.iocco
872
trunk/ulp/pcb-gcode-setup.ulp
Normal file
872
trunk/ulp/pcb-gcode-setup.ulp
Normal file
@@ -0,0 +1,872 @@
|
||||
//
|
||||
// Generate g-code for milling PC boards.
|
||||
//
|
||||
// Copyright 2004-2013 by John Johnson Software, LLC.
|
||||
// See readme.html for copyright information.
|
||||
//
|
||||
|
||||
#include "source/pcb-gcode.h"
|
||||
#include "settings/pcb-defaults.h"
|
||||
#include "settings/pcb-machine.h"
|
||||
#include "settings/gcode-defaults.h"
|
||||
#include "settings/pcb-gcode-options.h"
|
||||
#include "source/filecopy.h"
|
||||
#include "source/math.h"
|
||||
#include "source/filename_subs.h"
|
||||
#include "plugin_headers.h"
|
||||
|
||||
int m_current_units = OUTPUT_UNITS;
|
||||
string m_uom_suffix = "unknown";
|
||||
string M_UOM_SUFFIXES[] = {
|
||||
"mc", // microns
|
||||
"mm", // millimeters
|
||||
"ml", // mils
|
||||
"in" // inches
|
||||
};
|
||||
|
||||
int m_setup_was_changed = NO;
|
||||
string m_cmd;
|
||||
|
||||
string FILENAME_TOP_ETCH_FILE_SAMPLE;
|
||||
string FILENAME_TOP_DRILL_FILE_SAMPLE;
|
||||
string FILENAME_TOP_MILL_FILE_SAMPLE;
|
||||
string FILENAME_TOP_TEXT_FILE_SAMPLE;
|
||||
string FILENAME_TOP_FILL_FILE_SAMPLE;
|
||||
string FILENAME_BOT_ETCH_FILE_SAMPLE;
|
||||
string FILENAME_BOT_DRILL_FILE_SAMPLE;
|
||||
string FILENAME_BOT_MILL_FILE_SAMPLE;
|
||||
string FILENAME_BOT_TEXT_FILE_SAMPLE;
|
||||
string FILENAME_BOT_FILL_FILE_SAMPLE;
|
||||
|
||||
string temp_str;
|
||||
|
||||
void set_uom_suffix(int n)
|
||||
{
|
||||
m_uom_suffix = M_UOM_SUFFIXES[n];
|
||||
}
|
||||
|
||||
string get_uom_suffix()
|
||||
{
|
||||
return m_uom_suffix;
|
||||
}
|
||||
|
||||
void write_bool_param(string name, int value)
|
||||
{
|
||||
printf("int %s = %s;\n", name, (value) ? "YES" : "NO");
|
||||
}
|
||||
|
||||
void write_int_param(string name, int value)
|
||||
{
|
||||
printf("int %s = %d;\n", name, value);
|
||||
}
|
||||
|
||||
void write_int_defined(string name, string value)
|
||||
{
|
||||
printf("int %s = %s;\n", name, value);
|
||||
}
|
||||
|
||||
void write_real_param(string name, real value)
|
||||
{
|
||||
printf("real %s = %f;\n", name, value);
|
||||
}
|
||||
|
||||
void write_string_param(string name, string value)
|
||||
{
|
||||
printf("string %s = \"%s\";\n", name, value);
|
||||
}
|
||||
|
||||
// UNIT CONVERSION BEGIN TAG DO NOT REMOVE
|
||||
|
||||
void convert_units(int new_units)
|
||||
{
|
||||
MILLING_DEPTH = convert(MILLING_DEPTH, m_current_units, new_units);
|
||||
TEXT_DEPTH = convert(TEXT_DEPTH, m_current_units, new_units);
|
||||
SPOT_DRILL_DEPTH = convert(SPOT_DRILL_DEPTH, m_current_units, new_units);
|
||||
ISO_MIN = convert(ISO_MIN, m_current_units, new_units);
|
||||
ISO_MAX = convert(ISO_MAX, m_current_units, new_units);
|
||||
ISO_STEP = convert(ISO_STEP, m_current_units, new_units);
|
||||
DEFAULT_WIDTH = convert(DEFAULT_WIDTH, m_current_units, new_units);
|
||||
DEFAULT_Z_HIGH = convert(DEFAULT_Z_HIGH, m_current_units, new_units);
|
||||
DEFAULT_Z_UP = convert(DEFAULT_Z_UP, m_current_units, new_units);
|
||||
DEFAULT_Z_DOWN = convert(DEFAULT_Z_DOWN, m_current_units, new_units);
|
||||
DRILL_DEPTH = convert(DRILL_DEPTH, m_current_units, new_units);
|
||||
TOOL_CHANGE_POS_X = convert(TOOL_CHANGE_POS_X, m_current_units, new_units);
|
||||
TOOL_CHANGE_POS_Y = convert(TOOL_CHANGE_POS_Y, m_current_units, new_units);
|
||||
TOOL_CHANGE_POS_Z = convert(TOOL_CHANGE_POS_Z, m_current_units, new_units);
|
||||
FEED_RATE = convert(FEED_RATE, m_current_units, new_units);
|
||||
FEED_RATE_Z = convert(FEED_RATE_Z, m_current_units, new_units);
|
||||
EPSILON = convert(EPSILON, m_current_units, new_units);
|
||||
|
||||
set_uom_suffix(OUTPUT_UNITS);
|
||||
dlgRedisplay();
|
||||
m_current_units = new_units;
|
||||
}
|
||||
|
||||
// UNIT CONVERSION END TAG DO NOT REMOVE
|
||||
|
||||
// Copy the *.release.h files to *.h, thereby restoring
|
||||
// their default contents.
|
||||
void restore_file_defaults()
|
||||
{
|
||||
string restore_files[];
|
||||
string file_name;
|
||||
int num_files;
|
||||
int i;
|
||||
int release_start;
|
||||
|
||||
num_files = fileglob(restore_files,
|
||||
g_path + "/safe_options/" + "*.release.h");
|
||||
if (num_files == 0) {
|
||||
dlgMessageBox("There aren't any .release.h files,"
|
||||
" perhaps you should reinstall the program?");
|
||||
exit(0);
|
||||
}
|
||||
|
||||
for (i=0; i < num_files; i++) {
|
||||
release_start = strrstr(restore_files[i], ".release.h");
|
||||
file_name = strsub(restore_files[i], 0, release_start) + ".h";
|
||||
filecopy(restore_files[i], file_name);
|
||||
}
|
||||
|
||||
filecopy(g_path + "/profiles/generic.pp",
|
||||
g_path + "/settings/gcode-defaults.h");
|
||||
}
|
||||
|
||||
int pp_selection = -1;
|
||||
string pp_files[];
|
||||
string pp_auth_desc[];
|
||||
int num_pp_files;
|
||||
|
||||
num_pp_files = fileglob(pp_files, g_path + "/profiles/*.pp");
|
||||
|
||||
for(int i=0; i < num_pp_files; i++) {
|
||||
string lines[];
|
||||
|
||||
pp_auth_desc[i] = pp_files[i];
|
||||
|
||||
int num_lines = fileread(lines, pp_files[i]);
|
||||
for(int j=0; j < num_lines; j++) {
|
||||
string fields[];
|
||||
|
||||
int num_fields = strsplit(fields, lines[j], '=');
|
||||
for(int k=0; k < num_fields; k++) {
|
||||
|
||||
if(strlwr(fields[k]) == "// author") {
|
||||
pp_auth_desc[i] = pp_auth_desc[i] + " \t" + fields[k + 1];
|
||||
}
|
||||
else if(strlwr(fields[k]) == "// description") {
|
||||
pp_auth_desc[i] = pp_auth_desc[i] + " \t" + fields[k + 1];
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
string m_maximum_label = "Maximum";
|
||||
string m_step_size_label = "Step size";
|
||||
if (SINGLE_PASS) {
|
||||
m_maximum_label = "not used";
|
||||
m_step_size_label = "not used";
|
||||
}
|
||||
|
||||
string m_eagle_compatibility = "";
|
||||
string m_compatibility = "";
|
||||
if (EAGLE_VERSION < 5) {
|
||||
m_compatibility = "NOT COMPATIBLE";
|
||||
}
|
||||
else if (EAGLE_VERSION == 5) {
|
||||
m_compatibility = "verified compatible";
|
||||
}
|
||||
else if (EAGLE_VERSION == 6) {
|
||||
if (EAGLE_RELEASE <= 3) {
|
||||
m_compatibility = "verified compatible";
|
||||
}
|
||||
else {
|
||||
m_compatibility = "probably compatible";
|
||||
}
|
||||
}
|
||||
sprintf(m_eagle_compatibility, "%d.%d (%s)", EAGLE_VERSION, EAGLE_RELEASE, m_compatibility);
|
||||
|
||||
int Result = dlgDialog("pcb-gcode Setup") {
|
||||
|
||||
set_uom_suffix(OUTPUT_UNITS);
|
||||
|
||||
dlgVBoxLayout {
|
||||
dlgLabel(
|
||||
"<table>"
|
||||
"<tr>"
|
||||
"<td>"
|
||||
"<a href=http://groups.yahoo.com/group/pcb-gcode>"
|
||||
"<img src='docs/images/pcbgcode-600.gif' width='300'/>"
|
||||
"</a>"
|
||||
"</td>"
|
||||
"<td><h6><center>Copyright 2004-2013 by"
|
||||
" John Johnson Software, LLC.</center>"
|
||||
"<center>All Rights Reserved</center>"
|
||||
"<center>Version <em>3.6.0.4</em></center></h6></td>"
|
||||
"</tr>"
|
||||
"<tr><td></td><td><center>You have EAGLE version " + m_eagle_compatibility + "</center></td></tr>"
|
||||
"</table>");
|
||||
if (program_is_setup()) {
|
||||
dlgLabel("<h5><center>Your current profile is based on the <em>"
|
||||
+ CURRENT_PROFILE[DESCRIPTION] + "</em> profile.</center><hr></h5>");
|
||||
dlgLabel("<h6>Please use the settings under the tabs to"
|
||||
" customize the gcode that is generated for you.</h6>");
|
||||
}
|
||||
else {
|
||||
dlgLabel("<h4><center>Welcome!</center></h4><p>"
|
||||
"<h6>Since this is the first time you have run this setup"
|
||||
" program, please select the profile that best suits your machine."
|
||||
" Click the <em>Accept</em> button to save your changes.</h6>");
|
||||
}
|
||||
// dlgLabel("");
|
||||
}
|
||||
|
||||
|
||||
dlgTabWidget {
|
||||
|
||||
/***************************************************************
|
||||
*
|
||||
* G E N E R A T I O N O P T I O N S
|
||||
*
|
||||
***************************************************************/
|
||||
|
||||
if (program_is_setup()) dlgTabPage("Generation Options") {
|
||||
dlgHBoxLayout {
|
||||
dlgStretch(20);
|
||||
dlgVBoxLayout {
|
||||
dlgGroup("Top Side") {
|
||||
dlgCheckBox("Generate top outlines", GENERATE_TOP_OUTLINES);
|
||||
dlgCheckBox("Generate top drills ", GENERATE_TOP_DRILL);
|
||||
}
|
||||
dlgStretch(1);
|
||||
}
|
||||
dlgVBoxLayout {
|
||||
dlgGroup("Bottom Side") {
|
||||
dlgCheckBox("Generate bottom outlines",
|
||||
GENERATE_BOTTOM_OUTLINES);
|
||||
dlgCheckBox("Generate bottom drills ",
|
||||
GENERATE_BOTTOM_DRILL);
|
||||
dlgCheckBox("Mirror ",
|
||||
MIRROR_BOTTOM);
|
||||
}
|
||||
dlgStretch(1);
|
||||
dlgLabel("<img src='docs/images/isolation_settings_300.gif' width='300'/>");
|
||||
dlgStretch(3);
|
||||
}
|
||||
dlgVBoxLayout {
|
||||
dlgGroup("Board") {
|
||||
dlgVBoxLayout {
|
||||
dlgCheckBox("Show preview ", SHOW_PREVIEW);
|
||||
dlgGridLayout {
|
||||
dlgCell(0, 0) dlgCheckBox("Generate milling", GENERATE_MILLING);
|
||||
dlgCell(0, 1) dlgLabel("Depth ");
|
||||
dlgCell(0, 2) { dlgRealEdit(MILLING_DEPTH); dlgLabel(m_uom_suffix, YES); }
|
||||
|
||||
dlgCell(1, 0) dlgCheckBox("Generate text", GENERATE_TEXT);
|
||||
dlgCell(1, 1) dlgLabel("Depth ");
|
||||
dlgCell(1, 2) { dlgRealEdit(TEXT_DEPTH); dlgLabel(m_uom_suffix, YES); }
|
||||
dlgCell(2, 0) dlgCheckBox("Spot drill holes", SPOT_DRILL);
|
||||
dlgCell(2, 1) dlgLabel("Depth");
|
||||
dlgCell(2, 2) { dlgRealEdit(SPOT_DRILL_DEPTH); dlgLabel(m_uom_suffix, YES); }
|
||||
}
|
||||
dlgGridLayout {
|
||||
dlgCell(0, 0, 0, 1) dlgLabel("Isolation");
|
||||
dlgCell(0, 1) {
|
||||
dlgCheckBox("Single pass", SINGLE_PASS) {
|
||||
if (SINGLE_PASS) {
|
||||
/* dlgMessageBox("You have selected the single pass option.\n" +
|
||||
"The next time you run pcb-gcode-setup, the Maximum and Step Size " +
|
||||
"options will be hidden. Only Minimum will be shown.\n" +
|
||||
"To change back, just turn Single pass off, " +
|
||||
"click Accept, and run pcb-gcode-setup again.\n" +
|
||||
"The minimum, maximum, and step size options will be available again.");
|
||||
*/
|
||||
m_maximum_label = "not used";
|
||||
m_step_size_label = "not used";
|
||||
}
|
||||
else {
|
||||
m_maximum_label = "Maximum";
|
||||
m_step_size_label = "Step size";
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgCell(1, 0) dlgLabel("Minimum");
|
||||
dlgCell(1, 1) { dlgRealEdit(ISO_MIN);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(3, 0) dlgLabel(m_maximum_label, YES);
|
||||
dlgCell(3, 1) { dlgRealEdit(ISO_MAX);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(4, 0) dlgLabel(m_step_size_label, YES);
|
||||
dlgCell(4, 1) { dlgRealEdit(ISO_STEP);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
}
|
||||
dlgSpacing(10);
|
||||
dlgVBoxLayout {
|
||||
dlgLabel("Etching Tool Size ");
|
||||
dlgHBoxLayout { dlgRealEdit(DEFAULT_WIDTH);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgStretch(1);
|
||||
}
|
||||
dlgStretch(20);
|
||||
}
|
||||
dlgHBoxLayout {
|
||||
}
|
||||
}
|
||||
|
||||
/***************************************************************
|
||||
*
|
||||
* M A C H I N E
|
||||
*
|
||||
***************************************************************/
|
||||
if (program_is_setup()) dlgTabPage("Machine") {
|
||||
dlgHBoxLayout {
|
||||
dlgStretch(20);
|
||||
dlgLabel("<img src='docs/images/z_axis.gif'/>");
|
||||
dlgGroup("Z Axis") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Z High ");
|
||||
dlgCell(1, 1) {
|
||||
dlgRealEdit(DEFAULT_Z_HIGH);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(2, 0) dlgLabel("Z Up ");
|
||||
dlgCell(2, 1) {
|
||||
dlgRealEdit(DEFAULT_Z_UP);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(3, 0) dlgLabel("Z Down ");
|
||||
dlgCell(3, 1) {
|
||||
dlgRealEdit(DEFAULT_Z_DOWN);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(4, 0) dlgLabel("Drill Depth ");
|
||||
dlgCell(4, 1) {
|
||||
dlgRealEdit(DRILL_DEPTH);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(5, 0) dlgLabel("Drill Dwell ");
|
||||
dlgCell(5, 1) dlgRealEdit(DRILL_DWELL, 0); // DO NOT CONVERT
|
||||
}
|
||||
}
|
||||
dlgGroup("Tool Change") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Position X ");
|
||||
dlgCell(1, 1) { dlgRealEdit(TOOL_CHANGE_POS_X);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(2, 0) dlgLabel("Position Y ");
|
||||
dlgCell(2, 1) { dlgRealEdit(TOOL_CHANGE_POS_Y);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
dlgCell(3, 0) dlgLabel("Position Z ");
|
||||
dlgCell(3, 1) { dlgRealEdit(TOOL_CHANGE_POS_Z);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgStretch(20);
|
||||
}
|
||||
dlgHBoxLayout {
|
||||
dlgStretch(20);
|
||||
dlgGroup("Units") {
|
||||
dlgRadioButton("Microns", OUTPUT_UNITS) {
|
||||
convert_units(U_MICRONS);
|
||||
}
|
||||
dlgRadioButton("Millimeters", OUTPUT_UNITS) {
|
||||
convert_units(U_MILLIMETERS);
|
||||
}
|
||||
dlgRadioButton("Mils", OUTPUT_UNITS) {
|
||||
convert_units(U_MILS);
|
||||
}
|
||||
dlgRadioButton("Inches", OUTPUT_UNITS) {
|
||||
convert_units(U_INCHES);
|
||||
}
|
||||
}
|
||||
dlgGroup("Spindle") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Spin Up Time ");
|
||||
dlgCell(1, 1) dlgRealEdit(SPINDLE_ON_TIME); // DO NOT CONVERT
|
||||
}
|
||||
}
|
||||
dlgGroup("Feed Rates") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("X Y ");
|
||||
dlgCell(1, 1) { dlgRealEdit(FEED_RATE);
|
||||
dlgLabel(m_uom_suffix, YES); dlgLabel("/min");
|
||||
}
|
||||
dlgCell(2, 0) dlgLabel("Z ");
|
||||
dlgCell(2, 1) { dlgRealEdit(FEED_RATE_Z);
|
||||
dlgLabel(m_uom_suffix, YES); dlgLabel("/min");
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgGroup("Misc") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Epsilon");
|
||||
dlgCell(1, 1) { dlgRealEdit(EPSILON);
|
||||
dlgLabel(m_uom_suffix, YES);
|
||||
dlgPushButton("?") {
|
||||
dlgMessageBox("If an X or Y move is less than this amount, do not "
|
||||
"put a move in the g-code file. For instance, if one point is "
|
||||
"only 0.00001\" away from another point, there is no need to "
|
||||
"write the move to the g-code file, since the machine will not "
|
||||
"move anyway. This helps make the g-code file smaller, and run faster.");
|
||||
}
|
||||
}
|
||||
dlgCell(2, 0) dlgLabel("Default Drill Rack File");
|
||||
dlgCell(2, 1) dlgStringEdit(DEFAULT_DRILL_FILE);
|
||||
dlgCell(2, 2) {
|
||||
dlgPushButton("...") {
|
||||
DEFAULT_DRILL_FILE = dlgFileOpen("Find default drill rack file",
|
||||
g_path + "/settings",
|
||||
"Drill files (*.drl);;All files (*.*)");
|
||||
}
|
||||
dlgPushButton("?") {
|
||||
dlgMessageBox(
|
||||
"Please see docs/readme.html for full details.<br />"
|
||||
"pcb-gcode will look for (in order):<br />"
|
||||
"board.drl<br />"
|
||||
"The file you select here.<br />"
|
||||
"path_to_pcbgcode/settings/default.drl<br />"
|
||||
"If this setting is blank, and it does not find a file, "
|
||||
"it will assume you do not want to use a rack file.<br />"
|
||||
"If this setting is not blank, and it cannot find one of the "
|
||||
"files listed above, it will give you an error message."
|
||||
);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgStretch(20);
|
||||
}
|
||||
}
|
||||
|
||||
/***************************************************************
|
||||
*
|
||||
* G C O D E S T Y L E
|
||||
*
|
||||
***************************************************************/
|
||||
dlgTabPage("GCode Style") {
|
||||
dlgLabel("Please select your style of gcode below.");
|
||||
dlgLabel("If you make changes to gcode-defaults.h to "
|
||||
"work with your machine,");
|
||||
dlgLabel(
|
||||
"Please email the file to <a href=mailto:pcbgcode@pcbgcode.org>"
|
||||
"pcbgcode@pcbgcode.org</a> for possible inclusion "
|
||||
"in the next release.");
|
||||
dlgListView("File\tAuthor\tDescription",
|
||||
pp_auth_desc, pp_selection);
|
||||
}
|
||||
|
||||
/***************************************************************
|
||||
*
|
||||
* G C O D E O P T I O N S
|
||||
*
|
||||
***************************************************************/
|
||||
if (program_is_setup()) dlgTabPage("GCode Options") {
|
||||
dlgHBoxLayout {
|
||||
dlgVBoxLayout {
|
||||
dlgGroup("NC File Comments") {
|
||||
dlgCheckBox("NC File Comment from Board",
|
||||
NC_FILE_COMMENT_FROM_BOARD);
|
||||
dlgCheckBox("Nc File Comment Date",
|
||||
NC_FILE_COMMENT_DATE);
|
||||
dlgCheckBox("Nc File Comment Machine Settings",
|
||||
NC_FILE_COMMENT_MACHINE_SETTINGS);
|
||||
dlgCheckBox("Nc File Comment Pcb Defaults Settings",
|
||||
NC_FILE_COMMENT_PCB_DEFAULTS_SETTINGS);
|
||||
}
|
||||
// dlgStretch(1);
|
||||
}
|
||||
dlgGroup("Other Options") {
|
||||
dlgHBoxLayout {
|
||||
dlgVBoxLayout {
|
||||
dlgCheckBox("Use user gcode (from user-gcode.h)", USER_GCODE);
|
||||
dlgCheckBox("Debug Flag", g_debug_flag);
|
||||
dlgCheckBox("Do tool change with zero step", DO_TOOL_CHANGE_WITH_ZERO_STEP);
|
||||
dlgCheckBox("Flip board in Y instead of X", FLIP_BOARD_IN_Y);
|
||||
}
|
||||
dlgVBoxLayout {
|
||||
dlgCheckBox("Compact gcode", COMPACT_GCODE);
|
||||
dlgHBoxLayout {
|
||||
dlgCheckBox("Use line numbers?", USE_LINE_NUMBERS);
|
||||
dlgLabel(" Format "); dlgStringEdit(LINE_NUMBER_FORMAT);
|
||||
}
|
||||
dlgCheckBox("Use simple drill code ",
|
||||
SIMPLE_DRILL_CODE);
|
||||
}
|
||||
}
|
||||
// dlgStretch(1);
|
||||
}
|
||||
}
|
||||
dlgHBoxLayout {
|
||||
dlgGroup("File Naming") {
|
||||
dlgGridLayout {
|
||||
dlgCell(0, 0, 0, 1) {
|
||||
dlgLabel("Filename Base "); dlgStringEdit(FILENAME_BASE);
|
||||
}
|
||||
dlgCell(0, 2) {
|
||||
dlgLabel("Extension "); dlgStringEdit(DEFAULT_EXTENSION);
|
||||
dlgStretch(1);
|
||||
}
|
||||
dlgCell(2, 0) { dlgLabel("Word for 'etch'");
|
||||
dlgStringEdit(ETCH_FILE_NAME);
|
||||
}
|
||||
dlgCell(2, 1) { dlgLabel("Word for 'drill'");
|
||||
dlgStringEdit(DRILL_FILE_NAME);
|
||||
}
|
||||
dlgCell(2, 2) { dlgLabel("Word for 'mill'");
|
||||
dlgStringEdit(MILL_FILE_NAME);
|
||||
}
|
||||
dlgCell(2, 3) { dlgLabel("Word for 'text'");
|
||||
dlgStringEdit(TEXT_FILE_NAME); dlgStretch(1);
|
||||
}
|
||||
dlgCell(3, 0) { dlgLabel("Word for 'top'");
|
||||
dlgStringEdit(TOP_FILE_NAME);
|
||||
}
|
||||
dlgCell(3, 1) { dlgLabel("Word for 'bottom'");
|
||||
dlgStringEdit(BOT_FILE_NAME);
|
||||
}
|
||||
}
|
||||
dlgHBoxLayout {
|
||||
dlgGroup("Top (Component) Side Files") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Etching ");
|
||||
dlgCell(1, 1) { dlgStringEdit(FILENAME_TOP_ETCH_FILE); }
|
||||
dlgCell(2, 0) dlgLabel("Drill ");
|
||||
dlgCell(2, 1) { dlgStringEdit(FILENAME_TOP_DRILL_FILE); }
|
||||
dlgCell(3, 0) dlgLabel("Mill ");
|
||||
dlgCell(3, 1) { dlgStringEdit(FILENAME_TOP_MILL_FILE); }
|
||||
dlgCell(4, 0) dlgLabel("Text ");
|
||||
dlgCell(4, 1) { dlgStringEdit(FILENAME_TOP_TEXT_FILE); }
|
||||
}
|
||||
}
|
||||
dlgGroup("Bottom (Solder) Side Files") {
|
||||
dlgGridLayout {
|
||||
dlgCell(1, 0) dlgLabel("Etching ");
|
||||
dlgCell(1, 1) dlgStringEdit(FILENAME_BOT_ETCH_FILE);
|
||||
dlgCell(2, 0) dlgLabel("Drill ");
|
||||
dlgCell(2, 1) dlgStringEdit(FILENAME_BOT_DRILL_FILE);
|
||||
dlgCell(3, 0) dlgLabel("Mill ");
|
||||
dlgCell(3, 1) dlgStringEdit(FILENAME_BOT_MILL_FILE);
|
||||
dlgCell(4, 0) dlgLabel("Text ");
|
||||
dlgCell(4, 1) dlgStringEdit(FILENAME_BOT_TEXT_FILE);
|
||||
}
|
||||
}
|
||||
// dlgStretch(1);
|
||||
dlgVBoxLayout {
|
||||
dlgPushButton("Test Filenames") {
|
||||
FILENAME_TOP_ETCH_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_TOP_ETCH_FILE,
|
||||
TOP, PH_TOP_OUT_WRITE);
|
||||
FILENAME_TOP_DRILL_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_TOP_DRILL_FILE,
|
||||
TOP, PH_TOP_DRILL);
|
||||
FILENAME_TOP_MILL_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_TOP_MILL_FILE,
|
||||
TOP, PH_MILL);
|
||||
FILENAME_TOP_TEXT_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_TOP_TEXT_FILE,
|
||||
TOP, PH_TEXT);
|
||||
FILENAME_BOT_ETCH_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_BOT_ETCH_FILE,
|
||||
BOTTOM, PH_BOTTOM_OUT_WRITE);
|
||||
FILENAME_BOT_DRILL_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_BOT_DRILL_FILE,
|
||||
BOTTOM, PH_BOTTOM_DRILL);
|
||||
FILENAME_BOT_MILL_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_BOT_MILL_FILE,
|
||||
BOTTOM, PH_MILL);
|
||||
FILENAME_BOT_TEXT_FILE_SAMPLE = sub_side_phase(
|
||||
FILENAME_BASE + FILENAME_BOT_TEXT_FILE,
|
||||
BOTTOM, PH_TEXT);
|
||||
FILENAME_TOP_ETCH_FILE_SAMPLE = substitute(
|
||||
FILENAME_TOP_ETCH_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_TOP_DRILL_FILE_SAMPLE = substitute(
|
||||
FILENAME_TOP_DRILL_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_TOP_MILL_FILE_SAMPLE = substitute(
|
||||
FILENAME_TOP_MILL_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_TOP_TEXT_FILE_SAMPLE = substitute(
|
||||
FILENAME_TOP_TEXT_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_BOT_ETCH_FILE_SAMPLE = substitute(
|
||||
FILENAME_BOT_ETCH_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_BOT_DRILL_FILE_SAMPLE = substitute(
|
||||
FILENAME_BOT_DRILL_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_BOT_MILL_FILE_SAMPLE = substitute(
|
||||
FILENAME_BOT_MILL_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
FILENAME_BOT_TEXT_FILE_SAMPLE = substitute(
|
||||
FILENAME_BOT_TEXT_FILE_SAMPLE,
|
||||
key_value_record(" ", "_"));
|
||||
temp_str = ";Test Filenames\n"
|
||||
"Spaces in file paths have been "
|
||||
"replaced with underscores _ to keep "
|
||||
"the lines from wrapping.\n"
|
||||
"Top:\n"
|
||||
"Etch:\t" + FILENAME_TOP_ETCH_FILE_SAMPLE + "\n" +
|
||||
"Drill:\t" + FILENAME_TOP_DRILL_FILE_SAMPLE + "\n" +
|
||||
"Mill:\t" + FILENAME_TOP_MILL_FILE_SAMPLE + "\n" +
|
||||
"Text:\t" + FILENAME_TOP_TEXT_FILE_SAMPLE + "\n" +
|
||||
"\nBottom:\n"
|
||||
"Etch:\t" + FILENAME_BOT_ETCH_FILE_SAMPLE + "\n" +
|
||||
"Drill:\t" + FILENAME_BOT_DRILL_FILE_SAMPLE + "\n" +
|
||||
"Mill:\t" + FILENAME_BOT_MILL_FILE_SAMPLE + "\n" +
|
||||
"Text:\t" + FILENAME_BOT_TEXT_FILE_SAMPLE + "\n";
|
||||
dlgMessageBox(temp_str);
|
||||
}
|
||||
dlgPushButton("Help") {
|
||||
dlgMessageBox(filename_subs_help());
|
||||
}
|
||||
// dlgStretch(1);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
if (program_is_setup()) dlgTabPage("Plugins") {
|
||||
#include "plugins/plugin_loader.h"
|
||||
}
|
||||
|
||||
/***************************************************************
|
||||
*
|
||||
* O T H E R
|
||||
*
|
||||
***************************************************************/
|
||||
if (program_is_setup()) dlgTabPage("Other") {
|
||||
dlgHBoxLayout {
|
||||
dlgStretch(1);
|
||||
dlgVBoxLayout {
|
||||
dlgStretch(1);
|
||||
dlgGroup("Miscellaneous") {
|
||||
dlgGridLayout {
|
||||
dlgCell(0, 0, 0, 5) {
|
||||
dlgLabel("All misc. options are deprecated.");
|
||||
}
|
||||
}
|
||||
}
|
||||
dlgPushButton("Reset to Factory Defaults") {
|
||||
if (dlgMessageBox(
|
||||
"<qt>This is going to change the following files"
|
||||
" back to their default contents, <em>erasing</em> any changes"
|
||||
" you may have made to them:<p>"
|
||||
"<table>"
|
||||
"<tr><td>pcb-defaults.h</td><td>pcb-gcode-options.h</td></tr>"
|
||||
"<tr><td>pcb-machine.h</td><td>user-gcode.h</td></tr>"
|
||||
"</table><br>"
|
||||
"Is that something you want to do?<p>"
|
||||
"<b>If you aren't sure, click <em>No</em>.</b></qt>",
|
||||
"-Yes", "+No") == 0 /*Yes*/) {
|
||||
restore_file_defaults();
|
||||
exit("run pcb-gcode-setup");
|
||||
}
|
||||
}
|
||||
dlgStretch(1);
|
||||
}
|
||||
dlgStretch(1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
dlgHBoxLayout {
|
||||
dlgStretch(5);
|
||||
dlgPushButton("+&Accept") dlgAccept();
|
||||
if (program_is_setup()) {
|
||||
dlgPushButton("Accept and make my &board") dlgAccept(2);
|
||||
}
|
||||
dlgPushButton("-Cancel") {
|
||||
if (dlgMessageBox("Cancel your changes.<p>"
|
||||
"Are you sure?", "Yes", "No") == 0) dlgReject();
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
// Accept Accept and make board
|
||||
if (Result == 1 || Result == 2) {
|
||||
|
||||
fileerror();
|
||||
output(g_path + "/settings/pcb-defaults.h", "wt") {
|
||||
|
||||
int now = time();
|
||||
|
||||
printf(
|
||||
"//\n// Default values for generating gcode from a PCB.\n//\n");
|
||||
printf("// These settings were last changed with "
|
||||
"pcb-gcode-setup: %s\n//\n", t2string(now));
|
||||
printf("//\n// Changes you make in this file will be overwritten "
|
||||
"if you use pcb-gcode-setup.\n//\n\n");
|
||||
|
||||
write_bool_param("SINGLE_PASS", SINGLE_PASS);
|
||||
write_real_param("ISO_MIN", ISO_MIN);
|
||||
write_real_param("ISO_MAX", ISO_MAX);
|
||||
write_real_param("ISO_STEP", ISO_STEP);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("GENERATE_TOP_OUTLINES", GENERATE_TOP_OUTLINES);
|
||||
write_bool_param("GENERATE_TOP_DRILL", GENERATE_TOP_DRILL);
|
||||
write_bool_param("GENERATE_TOP_FILL", GENERATE_TOP_FILL);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("GENERATE_BOTTOM_OUTLINES",
|
||||
GENERATE_BOTTOM_OUTLINES);
|
||||
write_bool_param("GENERATE_BOTTOM_DRILL", GENERATE_BOTTOM_DRILL);
|
||||
write_bool_param("GENERATE_BOTTOM_FILL", GENERATE_BOTTOM_FILL);
|
||||
write_bool_param("MIRROR_BOTTOM",
|
||||
MIRROR_BOTTOM);
|
||||
write_bool_param("SIMPLE_DRILL_CODE", SIMPLE_DRILL_CODE);
|
||||
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("GENERATE_MILLING", GENERATE_MILLING);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("GENERATE_TEXT", GENERATE_TEXT);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("SPOT_DRILL", SPOT_DRILL);
|
||||
write_real_param("SPOT_DRILL_DEPTH", SPOT_DRILL_DEPTH);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("DO_TOOL_CHANGE_WITH_ZERO_STEP",
|
||||
DO_TOOL_CHANGE_WITH_ZERO_STEP);
|
||||
printf("\n");
|
||||
|
||||
write_bool_param("FLIP_BOARD_IN_Y", FLIP_BOARD_IN_Y);
|
||||
printf("\n");
|
||||
|
||||
// Place a // in front of units not being used
|
||||
if (OUTPUT_UNITS != U_MICRONS) printf("//");
|
||||
write_int_defined("OUTPUT_UNITS", "U_MICRONS");
|
||||
if (OUTPUT_UNITS != U_MILLIMETERS) printf("//");
|
||||
write_int_defined("OUTPUT_UNITS", "U_MILLIMETERS");
|
||||
if (OUTPUT_UNITS != U_MILS) printf("//");
|
||||
write_int_defined("OUTPUT_UNITS", "U_MILS");
|
||||
if (OUTPUT_UNITS != U_INCHES) printf("//");
|
||||
write_int_defined("OUTPUT_UNITS", "U_INCHES");
|
||||
}
|
||||
if(fileerror())
|
||||
exit(1);
|
||||
|
||||
if(pp_selection > -1) {
|
||||
if (dlgMessageBox(
|
||||
"<qt>If you have made manual changes to gcode-defaults.h, they"
|
||||
" will be overwritten by your new gcode style selection.<p>"
|
||||
"(Click <b>Yes</b> if you aren't sure.)<p>"
|
||||
"Save your selection?</qt>", "Yes", "No") == 0) {
|
||||
|
||||
filecopy(pp_files[pp_selection],
|
||||
g_path + "/settings/gcode-defaults.h");
|
||||
|
||||
fileerror();
|
||||
set_current_profile(pp_auth_desc[pp_selection]);
|
||||
if(fileerror())
|
||||
exit(1);
|
||||
|
||||
m_setup_was_changed = YES;
|
||||
}
|
||||
}
|
||||
|
||||
output(g_path + "/settings/pcb-gcode-options.h") {
|
||||
printf("//\n");
|
||||
printf("// General Options ");
|
||||
printf("// Your edits to this file will be overwritten"
|
||||
" by the setup program.\n");
|
||||
printf("//\n");
|
||||
write_bool_param("SHOW_PROGRESS", SHOW_PROGRESS);
|
||||
write_string_param("RESTORE_MENU_FILE", RESTORE_MENU_FILE);
|
||||
write_bool_param("NC_FILE_COMMENT_FROM_BOARD",
|
||||
NC_FILE_COMMENT_FROM_BOARD);
|
||||
write_bool_param("NC_FILE_COMMENT_DATE", NC_FILE_COMMENT_DATE);
|
||||
write_bool_param("NC_FILE_COMMENT_MACHINE_SETTINGS",
|
||||
NC_FILE_COMMENT_MACHINE_SETTINGS);
|
||||
write_bool_param("NC_FILE_COMMENT_PCB_DEFAULTS_SETTINGS",
|
||||
NC_FILE_COMMENT_PCB_DEFAULTS_SETTINGS);
|
||||
write_bool_param("USER_GCODE", USER_GCODE);
|
||||
write_bool_param("g_debug_flag", g_debug_flag);
|
||||
write_bool_param("COMPACT_GCODE", COMPACT_GCODE);
|
||||
write_bool_param("USE_LINE_NUMBERS", USE_LINE_NUMBERS);
|
||||
write_string_param("LINE_NUMBER_FORMAT", LINE_NUMBER_FORMAT);
|
||||
write_bool_param("SHOW_PREVIEW", SHOW_PREVIEW);
|
||||
|
||||
write_string_param("FILENAME_BASE", FILENAME_BASE);
|
||||
write_string_param("FILENAME_TOP_ETCH_FILE", FILENAME_TOP_ETCH_FILE);
|
||||
write_string_param("FILENAME_TOP_DRILL_FILE", FILENAME_TOP_DRILL_FILE);
|
||||
write_string_param("FILENAME_TOP_MILL_FILE", FILENAME_TOP_MILL_FILE);
|
||||
write_string_param("FILENAME_TOP_TEXT_FILE", FILENAME_TOP_TEXT_FILE);
|
||||
write_string_param("FILENAME_TOP_FILL_FILE", FILENAME_TOP_FILL_FILE);
|
||||
|
||||
write_string_param("FILENAME_BOT_ETCH_FILE", FILENAME_BOT_ETCH_FILE);
|
||||
write_string_param("FILENAME_BOT_DRILL_FILE", FILENAME_BOT_DRILL_FILE);
|
||||
write_string_param("FILENAME_BOT_MILL_FILE", FILENAME_BOT_MILL_FILE);
|
||||
write_string_param("FILENAME_BOT_TEXT_FILE", FILENAME_BOT_TEXT_FILE);
|
||||
write_string_param("FILENAME_BOT_FILL_FILE", FILENAME_BOT_FILL_FILE);
|
||||
write_string_param("ETCH_FILE_NAME", ETCH_FILE_NAME);
|
||||
write_string_param("DRILL_FILE_NAME", DRILL_FILE_NAME);
|
||||
write_string_param("MILL_FILE_NAME", MILL_FILE_NAME);
|
||||
write_string_param("TEXT_FILE_NAME", TEXT_FILE_NAME);
|
||||
write_string_param("TOP_FILE_NAME", TOP_FILE_NAME);
|
||||
write_string_param("BOT_FILE_NAME", BOT_FILE_NAME);
|
||||
write_string_param("DEFAULT_EXTENSION", DEFAULT_EXTENSION);
|
||||
|
||||
write_string_param("DEFAULT_DRILL_FILE", DEFAULT_DRILL_FILE);
|
||||
}
|
||||
|
||||
output(g_path + "/settings/pcb-machine.h") {
|
||||
printf("//\n");
|
||||
printf("// For ease of use, and to avoid overwritting your settings,\n");
|
||||
printf("// use pcb-gcode-setup to make changes to these settings.\n");
|
||||
printf("//\n\n");
|
||||
write_real_param("DEFAULT_Z_HIGH", DEFAULT_Z_HIGH);
|
||||
write_real_param("DEFAULT_Z_UP", DEFAULT_Z_UP);
|
||||
write_real_param("DEFAULT_Z_DOWN", DEFAULT_Z_DOWN);
|
||||
write_real_param("DRILL_DEPTH", DRILL_DEPTH);
|
||||
write_real_param("DRILL_DWELL", DRILL_DWELL);
|
||||
write_real_param("SPINDLE_ON_TIME", SPINDLE_ON_TIME);
|
||||
write_real_param("MILLING_DEPTH", MILLING_DEPTH);
|
||||
write_real_param("TEXT_DEPTH", TEXT_DEPTH);
|
||||
write_real_param("TOOL_CHANGE_POS_X", TOOL_CHANGE_POS_X);
|
||||
write_real_param("TOOL_CHANGE_POS_Y", TOOL_CHANGE_POS_Y);
|
||||
write_real_param("TOOL_CHANGE_POS_Z", TOOL_CHANGE_POS_Z);
|
||||
write_real_param("FEED_RATE", FEED_RATE);
|
||||
write_real_param("FEED_RATE_Z", FEED_RATE_Z);
|
||||
write_real_param("DEFAULT_WIDTH", DEFAULT_WIDTH);
|
||||
write_real_param("X_OFFSET", X_OFFSET);
|
||||
write_real_param("Y_OFFSET",Y_OFFSET);
|
||||
write_real_param("X_HOME", X_HOME);
|
||||
write_real_param("Y_HOME",Y_HOME);
|
||||
write_real_param("EPSILON", EPSILON);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
m_cmd = "";
|
||||
switch (Result) {
|
||||
// Accept
|
||||
case 1:
|
||||
if (m_setup_was_changed)
|
||||
m_cmd = "run pcb-gcode-setup;\n";
|
||||
break;
|
||||
// Accept and make board
|
||||
case 2:
|
||||
// dlgMessageBox("g_path = \"" + g_path + "\"");
|
||||
m_cmd = "run pcb-gcode;\n";
|
||||
break;
|
||||
}
|
||||
|
||||
if (SHOW_PROGRESS && RESTORE_MENU_FILE != "") {
|
||||
m_cmd = "script " + RESTORE_MENU_FILE + ";\n" + m_cmd;
|
||||
}
|
||||
exit(m_cmd);
|
||||
Reference in New Issue
Block a user