trunk/Arduino/libraries/DallasTemperature/examples/SaveRecallScratchPad/SaveRecallScratchPad.ino

@@ -23,23 +23,23 @@ void setup()
   Serial.begin(9600);
   Serial.println(__FILE__);
   Serial.println("Dallas Temperature Demo");
-  
+
   sensors.begin();
-  
+
   // Get ID of first sensor (at index 0)
-  sensors.getAddress(deviceAddress,0);
+  sensors.getAddress(deviceAddress, 0);
 
   // By default configuration and alarm/userdata registers are also saved to EEPROM
   // when they're changed. Sensors recall these values automatically when powered up.
-  
+
   // Turn OFF automatic saving of configuration and alarm/userdata registers to EEPROM
   sensors.setAutoSaveScratchPad(false);
-  
+
   // Change configuration and alarm/userdata registers on the scratchpad
   int8_t resolution = 12;
-  sensors.setResolution(deviceAddress,resolution);
+  sensors.setResolution(deviceAddress, resolution);
   int16_t userdata = 24680;
-  sensors.setUserData(deviceAddress,userdata);
+  sensors.setUserData(deviceAddress, userdata);
 
   // Save configuration and alarm/userdata registers to EEPROM
   sensors.saveScratchPad(deviceAddress);
@@ -53,28 +53,28 @@ void setup()
   // EEPROM by index:
   //
   //   sensors.saveScratchPadByIndex(0);
-  
+
   // Print current values on the scratchpad (resolution = 12, userdata = 24680)
   printValues();
-  
+
 }
 
-void loop(){
-  
+void loop() {
+
   // Change configuration and alarm/userdata registers on the scratchpad
   int8_t resolution = 10;
-  sensors.setResolution(deviceAddress,resolution);
+  sensors.setResolution(deviceAddress, resolution);
   int16_t userdata = 12345;
-  sensors.setUserData(deviceAddress,userdata);
-  
+  sensors.setUserData(deviceAddress, userdata);
+
   // Print current values on the scratchpad (resolution = 10, userdata = 12345)
   printValues();
-  
+
   delay(2000);
-  
+
   // Recall configuration and alarm/userdata registers from EEPROM
   sensors.recallScratchPad(deviceAddress);
-  
+
   // recallScratchPad can also be used without a parameter to recall the configuration
   // and alarm/userdata registers of ALL connected sensors from EEPROM:
   //
@@ -84,23 +84,23 @@ void loop(){
   // from EEPROM by index:
   //
   //   sensors.recallScratchPadByIndex(0);
-  
+
   // Print current values on the scratchpad (resolution = 12, userdata = 24680)
   printValues();
-  
+
   delay(2000);
-  
+
 }
 
 void printValues() {
-  
+
   Serial.println();
   Serial.println("Current values on the scratchpad:");
-  
+
   Serial.print("Resolution:\t");
   Serial.println(sensors.getResolution(deviceAddress));
-  
+
   Serial.print("User data:\t");
   Serial.println(sensors.getUserData(deviceAddress));
-  
+
 }