daily_automated

trunk/Arduino/sketch_pro_IR/makefile

@@ -0,0 +1,132 @@
+# Arduino Make file. Refer to https://github.com/sudar/Arduino-Makefile
+#
+
+#BOARD_TAG    = uno
+BOARD_TAG = pro
+BOARD_SUB = 16MHzatmega328
+include ../paths.mk
+include ../Arduino.mk
+
+# --- leonardo (or pro micro w/leo bootloader)
+#BOARD_TAG    = leonardo
+#MONITOR_PORT = /dev/ttyACM0
+#include /usr/share/arduino/Arduino.mk
+
+# --- mega2560 ide 1.0
+#BOARD_TAG    = mega2560
+#ARDUINO_PORT = /dev/ttyACM0
+#include /usr/share/arduino/Arduino.mk
+
+# --- mega2560 ide 1.6
+#BOARD_TAG    = mega
+#BOARD_SUB    = atmega2560
+#MONITOR_PORT = /dev/ttyACM0
+#ARDUINO_DIR  = /where/you/installed/arduino-1.6.5
+#include /usr/share/arduino/Arduino.mk
+
+# --- nano ide 1.0
+#BOARD_TAG    = nano328
+#MONITOR_PORT = /dev/ttyUSB0
+#include /usr/share/arduino/Arduino.mk
+
+# --- nano ide 1.6
+#BOARD_TAG   = nano
+#BOARD_SUB   = atmega328
+#ARDUINO_DIR = /where/you/installed/arduino-1.6.5
+#include /usr/share/arduino/Arduino.mk
+
+# --- pro mini
+#BOARD_TAG    = pro5v328
+#MONITOR_PORT = /dev/ttyUSB0
+#include /usr/share/arduino/Arduino.mk
+
+# --- sparkfun pro micro
+#BOARD_TAG         = promicro16
+#ALTERNATE_CORE    = promicro
+#BOARDS_TXT        = $(HOME)/arduino/hardware/promicro/boards.txt
+#BOOTLOADER_PARENT = $(HOME)/arduino/hardware/promicro/bootloaders
+#BOOTLOADER_PATH   = caterina
+#BOOTLOADER_FILE   = Caterina-promicro16.hex
+#ISP_PROG     	   = usbasp
+#AVRDUDE_OPTS 	   = -v
+#include /usr/share/arduino/Arduino.mk
+
+# --- chipkit
+#BOARD_TAG = mega_pic32
+#MPIDE_DIR = /where/you/installed/mpide-0023-linux64-20130817-test
+#include /usr/share/arduino/chipKIT.mk
+
+# --- pinoccio
+#BOARD_TAG         = pinoccio256
+#ALTERNATE_CORE    = pinoccio
+#BOOTLOADER_PARENT = $(HOME)/arduino/hardware/pinoccio/bootloaders
+#BOOTLOADER_PATH   = STK500RFR2/release_0.51
+#BOOTLOADER_FILE   = boot_pinoccio.hex
+#CFLAGS_STD        = -std=gnu99
+#CXXFLAGS_STD      = -std=gnu++11
+#include /usr/share/arduino/Arduino.mk
+
+# --- fio
+#BOARD_TAG = fio
+#include /usr/share/arduino/Arduino.mk
+
+# --- atmega-ng ide 1.6
+#BOARD_TAG    = atmegang
+#BOARD_SUB    = atmega168
+#MONITOR_PORT = /dev/ttyACM0
+#ARDUINO_DIR  = /where/you/installed/arduino-1.6.5
+#include /usr/share/arduino/Arduino.mk
+
+# --- arduino-tiny ide 1.0
+#ISP_PROG     	    = usbasp
+#BOARD_TAG          = attiny85at8
+#ALTERNATE_CORE     = tiny
+#ARDUINO_VAR_PATH   = $(HOME)/arduino/hardware/tiny/cores/tiny
+#ARDUINO_CORE_PATH  = $(HOME)/arduino/hardware/tiny/cores/tiny
+#AVRDUDE_OPTS 	    = -v
+#include /usr/share/arduino/Arduino.mk
+
+# --- arduino-tiny ide 1.6
+#ISP_PROG       = usbasp
+#BOARD_TAG      = attiny85at8
+#ALTERNATE_CORE = tiny
+#ARDUINO_DIR    = /where/you/installed/arduino-1.6.5
+#include /usr/share/arduino/Arduino.mk
+
+# --- damellis attiny ide 1.0
+#ISP_PROG       = usbasp
+#BOARD_TAG      = attiny85
+#ALTERNATE_CORE = attiny-master
+#AVRDUDE_OPTS   = -v
+#include /usr/share/arduino/Arduino.mk
+
+# --- damellis attiny ide 1.6
+#ISP_PROG       = usbasp
+#BOARD_TAG      = attiny
+#BOARD_SUB      = attiny85
+#ALTERNATE_CORE = attiny
+#F_CPU          = 16000000L
+#ARDUINO_DIR    = /where/you/installed/arduino-1.6.5
+#include /usr/share/arduino/Arduino.mk
+
+# --- teensy3
+#BOARD_TAG 	 = teensy31
+#ARDUINO_DIR = /where/you/installed/the/patched/teensy/arduino-1.0.6
+#include /usr/share/arduino/Teensy.mk
+
+# --- mighty 1284p
+#BOARD_TAG         = mighty_opt
+#BOARDS_TXT        = $(HOME)/arduino/hardware/mighty-1284p/boards.txt
+#BOOTLOADER_PARENT = $(HOME)/arduino/hardware/mighty-1284p/bootloaders
+#BOOTLOADER_PATH   = optiboot
+#BOOTLOADER_FILE   = optiboot_atmega1284p.hex
+#ISP_PROG     	   = usbasp
+#AVRDUDE_OPTS 	   = -v
+#include /usr/share/arduino/Arduino.mk
+
+# --- atmega328p on breadboard
+#BOARD_TAG    = atmega328bb
+#ISP_PROG     = usbasp
+#AVRDUDE_OPTS = -v
+#BOARDS_TXT   = $(HOME)/arduino/hardware/breadboard/boards.txt
+#include /usr/share/arduino/Arduino.mk

trunk/Arduino/sketch_pro_IR/sketch_pro_IR.ino

@@ -0,0 +1,60 @@
+/*
+ * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+ /* **************************************** *
+  * Title                                    *
+  * **************************************** *
+  * (C) 201x-xx-xx Paolo Iocco               *
+  * rev. 0.x                                 *
+  * **************************************** *
+  * Circuit diagram
+  * ---------------
+  *					 +-------+
+  *					 | ooooo |
+  *       D1--TX<----|   A   |<---------RAW
+  *       D0--RX---->|   r   |<---------GND
+  *       RST------->|   d   |<---------RST
+  *       GND------->|   u   |<---------VCC
+  *       D2-------->|   i   |-----A3---D17
+  *       D3----#--->|   n   |-----A2---D16
+  *       D4-------->|   o   |-----A1---D15
+  *       D5<---#----|       |-----A0---D14
+  *       D6<---#----|   m   |-----SCK--D13
+  *       D7---------|   i   |-----MISO-D12
+  *       D8---------|   n   |--#--MOSI-D11
+  *       D9----#----|   i   |--#--SS---D10
+  *					 +-------+
+  *
+  * ***************************************** */
+
+#include <stdlib.h>
+#include <IRremote.h>
+#include "sys64738.h"
+
+#define OLED_SDA 8
+#define OLED_SCL 9
+int RECV_PIN = 2;
+
+IRrecv irrecv(RECV_PIN);
+DisplayIIC OLED(OLED_SDA, OLED_SCL);
+
+decode_results results;
+
+void setup(){
+	Serial.begin(9600);
+	irrecv.enableIRIn(); // Start the receiver
+}
+
+void loop() {
+	char text[16];
+	if (irrecv.decode(&results)) {
+		Serial.println(results.value, HEX);
+		itoa(results.value,text,16);
+		OLED.WriteStringXY(0,0,text,FONT_6x8);
+		irrecv.resume(); // Receive the next value
+	}
+}