See also the commit log at github: https://github.com/Arduino-IRremote/Arduino-IRremote/commits/master
2024-09-24 16:54:39 +00:00
# 4.3.0
- Removed default value USE_DEFAULT_FEEDBACK_LED_PIN for last parameter of IRsend::begin(bool aEnableLEDFeedback, uint_fast8_t aFeedbackLEDPin).
Therefore IrSender.begin(DISABLE_LED_FEEDBACK) will not longer work!
- Added convenience function isIRReceiverAttachedForTinyReceiver().
- Added Extended NEC Protocol macro to TinyIR by Buzzerb.
- Fixed sendSamsung() / sendSamsungLG() bug.
- Added functions stopTimer(), restartTimer() and restartTimerWithTicksToAdd().
- Added rawlen and initialGap to IRData.
- Added ReceiveAndSendHobToHood example.
- Changed RECORD_GAP_MICROS default value from 5000 to 8000.
# 4.2.1
- Fix wrong type of tEnableLEDFeedback in IRSend.hpp and IRReceive.hpp.
- TinyReceiver 2.0
- New TinyIRReceiverData which is filled with address, command and flags.
- Removed parameters address, command and flags from callback handleReceivedTinyIRData() and printTinyReceiverResultMinimal().
- Callback function now only enabled if USE_CALLBACK_FOR_TINY_RECEIVER is activated.
- Fix changing IR_SEND_PIN dynamically for ESP32.
- Fix wrong type of tEnableLEDFeedback.
- Support for ESP32-C3.
# 4.2.0
- The old decode function is renamed to decode_old(decode_results *aResults). decode (decode_results *aResults) is only available in IRremote.h and prints a message.
- Added DECODE_ONKYO, to force 16 bit command and data decoding.
- Enable Bang&Olufsen 455 kHz if SEND_PWM_BY_TIMER is defined.
- Fixed bug: TinyReceiver throwing ISR not in IRAM on ESP8266.
- Usage of ATTinyCore pin numbering scheme e.g. PIN_PB2.
- Added ARDUINO_ARCH_NRF52 to support Seeed XIAO nRF52840 Sense.
- First untested support of Uno R4.
- Extraced version macros to IRVersion.h.
## 4.1.2
- Workaround for ESP32 RTOS delay() timing bug influencing the mark() function.
## 4.1.1
- SAMD51 use timer3 if timer5 not available.
- Disabled #define LOCAL_DEBUG in IRReceive.hpp, which was accidently enabled at 4.1.0.
## 4.1.0
- Fixed bug in printing durations > 64535 in printIRResultRawFormatted().
- Narrowed constraints for RC5 RC6 number of bits.
- Changed the first parameter of printTinyReceiverResultMinimal() to &Serial.
- Removed 3 Serial prints for deprecation warnings to fix #1094.
- Version 1.2.0 of TinyIR. Now FAST protocol with 40 ms period and shorter header space.
- Removed field "bool hasStopBit" and parameter "bool aSendStopBit" from PulseDistanceWidthProtocolConstants structure and related functions.
- Changed a lot of "unsigned int" types to "uint16_t" types.
- Improved overflow handling.
- Improved software PWM generation.
- Added FAST protocol.
- Improved handling of PULSE_DISTANCE + PULSE_WIDTH protocols.
- New example ReceiveAndSendDistanceWidth.
- Removed the automatic restarting of the receiver timer after sending with SEND_PWM_BY_TIMER enabled.
- Split ISR into ISR and function IRPinChangeInterruptHandler().
- Added functions addTicksToInternalTickCounter() and addMicrosToInternalTickCounter().
## 4.0.0
- Added decoding of PulseDistanceWidth protocols and therefore changed function decodeDistance() to decodeDistanceWidth() and filename ir_DistanceProtocol.hpp to ir_DistanceWidthProtocol.hpp.
- Removed static function printIRSendUsage(), but kept class function printIRSendUsage().
- Changed type of decodedRawData and decodedRawDataArray which is now 64 bit for 32 bit platforms.
- Added receiver callback functionality and registerReceiveCompleteCallback() function.
- Introduced common structure PulseDistanceWidthProtocolConstants.
- Where possible, changed all send and decode functions to use PulseDistanceWidthProtocolConstants.
- Improved MSB/LSB handling
- New convenience fuctions bitreverse32Bit() and bitreverseOneByte().
- Improved Magiquest protocol.
- Fix for #1028 - Prevent long delay caused by overflow when frame duration < repeat period - Thanks to Stephen Humphries!
- Support for ATtiny816 - Thanks to elockman.
- Added Bang&Olufsen protocol. #1030.
- Third parameter of function "void begin(uint_fast8_t aSendPin, bool aEnableLEDFeedback, uint_fast8_t aFeedbackLEDPin)" is not optional anymore and this function is now only available if IR_SEND_PIN is not defined. #1033.
- Fixed bug in sendSony() for command parameter > 0x7F;
- Fixed bug with swapped LG2 header mark and space.
- Disabled strict checks while decoding. They can be enabled by defining DECODE_STRICT_CHECKS.
- Merged the 2 decode pulse width and distance functions.
- Changed macro names _REPEAT_SPACE to _REPEAT_DISTANCE.
- Improved TinyIRReceiver,added FAST protocol for it and added TinyIRSender.hpp and TinySender example, renamed TinyReceiver.h to TinyIR.h.
- Added DISABLE_CODE_FOR_RECEIVER to save program memory and RAM if receiving functionality is not required.
- Extracted protocol functions used by receive and send to IRProtocol.hpp.
- Analyzed Denon code table and therefore changed Denon from MSB to LSB first.
- Renamed sendRC6(aRawData...) to sendRC6Raw( aRawData...).
- Support for seeduino which lacks the print(unsigned long long...) method. Thanks to sklott https://stackoverflow.com/users/11680056/sklott
- Added support for attiny1614 by Joe Ostrander.
- Fixed SEND_PWM_BY_TIMER for ATtiny167 thanks to freskpe.
- Improved SHARP repeat decoding.
- Replaced macros TIMER_EN/DISABLE_RECEIVE_INTR and EN/DISABLE_SEND_PWM_BY_TIMER by functions.
- Added SAMSUNG48 protocol and sendSamsung48() function.
- Added Kaseikyo convenience functions like sendKaseikyo_Denon().
- Improved / adjusted LG protocol and added class Aircondition_LG based on real hardware supplied by makerspace 201 (https://wiki.hackerspaces.org/ZwoNullEins) from Cologne.
- Improved universal decoder for pulse distance protocols to support more than 32 bits.
- Added mbed support.
## 3.3.0
- Fix errors if LED_BUILTIN is not defined.
- Fixed error for AVR timer1. Thanks to alexbarcelo.
- New example IRremoteExtensionTest.
- Enabled megaAVR 0-series devices.
- Added universal decoder for pulse distance protocols.
## 3.2.0
- Fix for ESP32 send Error, removed `USE_SOFT_SEND_PWM` macro.
- Added Onkyo protocol.
- Support for old 2.x code by backwards compatible `decode(decode_results *aResults)` function.
- Removed USE_OLD_DECODE macro and added NO_LEGACY_COMPATIBILITY macro.
- Added ATtiny1604 support.
- New SendAndReceive example.
- Added ESP8266 support.
- Extended DEBUG output.
## 3.1.0
- Generation of PWM by software is active by default.
- Removed decode_results results.
- Renamed most irparams_struct values.
- Fixed LG send bug and added unit test.
- Replaced `#define DECODE_NEC 1/0` by defining/not defining.
- Use LED_BUILTIN instead of FEEDBACK_LED if FeedbackLEDPin is 0.
- Use F_CPU instead of SYSCLOCK.
- Removed SENDPIN_ON and SENDPIN_OFF macros.
- Refactored board specific code for timer and feedback LED.
- Extracted common LED feedback functions and implemented feedback for send.
- MATCH_MARK() etc. now available as matchMark().
- Added STM32F1 by (by Roger Clark) support.
- Added stm32 (by ST) support. Thanks to Paolo Malaspina.
- Added ATtiny88 support.
## 3.0.2
- Bug fix for USE_OLD_DECODE.
- Increase RECORD_GAP_MICROS to 11000.
- Fix overflow message. (#793).
- Improved handling for HASH decoder.
- Tested for ATtiny85.
- Added `printIRResultMinimal()`.
- Added missing IRAM_ATTR for ESP32.
- Adapted to TinyCore 0.0.7.
- Fixed decodeSony 20 bit bug #811.
- Replaced delayMicroseconds with customDelayMicroseconds and removed NoInterrupt() for send functions, removed SPIN_WAIT macro, sleepMicros() and sleepUntilMicros().
- Fixed LG checksum error.
- Fixed JVC repeat error.
## 3.0.0 + 3.0.1 2021/02
- New LSB first decoders are default.
- Added SendRaw with byte data.
- Fixed resume bug if irparams.rawlen >= RAW_BUFFER_LENGTH. Thanks to Iosif Peterfi
- Added `dumpPronto(String *aString, unsigned int frequency)` with String object as argument. Thanks to Iosif Peterfi
- Removed Test2 example.
- Fixed swapped cases in `getProtocolString()`. Thanks to Jim-2249
- Added compile option `IR_INPUT_IS_ACTIVE_HIGH`. Thanks to Jim-2249
- Corrected template. Thanks to Jim-2249
- Introduced standard decode and send functions.
- Added compatibility with tone for AVR's.
- New TinyIRreceiver does not require a timer.
- New MinimalReceiver and IRDispatcherDemo examples.
- Added TinyCore 32 / ATtiny3217 support.
- Added Apple protocol.
## 2.8.1 2020/10
- Fixed bug in Sony decode introduced in 2.8.0.
## 2.8.0 2020/10
- Changed License to MIT see https://github.com/Arduino-IRremote/Arduino-IRremote/issues/397.
- Added ATtiny timer 1 support.
- Changed wrong return code signature of decodePulseDistanceData() and its handling.
- Removed Mitsubishi protocol, since the implementation is in contradiction with all documentation I found and therefore supposed to be wrong.
- Removed AIWA implementation, since it is only for 1 device and at least the sending was implemented wrong.
- Added Lego_PF decode.
- Changed internal usage of custom_delay_usec.
- Moved dump/print functions from example to irReceiver.
- irPronto.cpp: Using Print instead of Stream saves 1020 bytes program memory. Changed from & to * parameter type to be more transparent and consistent with other code of IRremote.
## 2.7.0 2020/09
- Added ATmega328PB support.
- Renamed hardware specific macro and function names.
- Renamed `USE_SOFT_CARRIER`, `USE_NO_CARRIER`, `DUTY_CYCLE` macros to `USE_SOFT_SEND_PWM`, `USE_NO_SEND_PWM`, `IR_SEND_DUTY_CYCLE`.
- Removed blocking wait for ATmega32U4 Serial in examples.
- Deactivated default debug output.
- Optimized types in sendRC5ext and sendSharpAlt.
- Added `DECODE_NEC_STANDARD` and `SEND_NEC_STANDARD`.
- Renamed all IRrecv* examples to IRreceive*.
- Added functions `printIRResultShort(&Serial)` and `getProtocolString(decode_type_t aDecodeType)`.
- Added flag `decodedIRData.isRepeat`.
- Updated examples.
## 2.6.1 2020/08
- Adjusted JVC and LG timing.
- Fixed 4809 bug.
## 2.6.0 2020/08
- Added support for MagiQuest IR wands.
- Corrected Samsung timing.
- NEC repeat implementation.
- Formatting and changing `TIMER_CONFIG_KHZ` and `TIMER_CONFIG_NORMAL` macros to static functions.
- Added `IRAM_ATTR` for ESP32 ISR.
- Removed `#define HAS_AVR_INTERRUPT_H`.
- Changed Receiver States. Now starting with 0.
- Changed switch to if / else if in IRRemote.cpp because of ESP32 compiler bug.
- Changed `DEBUG` handling since compiler warns about empty "IF" or "ELSE" statements in IRRemote.cpp.
